F16-Landing-Banner-1400x275

Symposium PM5 : Hierarchical, Hybrid and Roll-to-Roll Manufacturing for Device Applications

2016-11-28   Show All Abstracts

Symposium Organizers

James Watkins, Univ of Massachusetts
Karen Chong, Institute of Materials Research and Engineering (IMRE) / A-STAR
Jukka Hast, VTT Printed Intelligence
Mark D. Poliks, Binghamton University

Symposium Support

State University of New York at Binghamton, University of Massachusetts Amherst (Center for Hierarchical Manufacturing)
PM5.1: Nanoimprint and Structuring
Session Chairs
Karen Chong
James Watkins
Monday AM, November 28, 2016
Hynes, Level 1, Room 109

8:15 AM - *PM5.1.01
R2R-Nanoimprint Lithography on the Long Run for Fabrication of Hierarchical Microfluidic Structures on Large and Flexible Plastic Films

Barbara Stadlober 1 , Dieter Nees 1 , Ursula Palfinger 1 , Stephan Ruttloff 1 , Johannes Goetz 1 , Catherine Tran 1 , Maria Belegratis 1 , Michael Suppan 1 , Anja Haase 1

1 Joanneum Research Forschungsgesellschaft mbH Weiz Austria

Show Abstract

8:45 AM - PM5.1.02
Sacrificial Nanoimprint Lithography as a Scalable Approach to Porous Polymer Membranes for Filtration

Imrhankhan Shajahan 1 , Devin Shaffer 2 , Lin Lei 1 , Edwin Chan 2 , Jonathan Singer 1

1 Rutgers University Piscataway United States, 2 National Institute of Standards and Technology Gaithersburg United States

Show Abstract

9:00 AM - *PM5.1.03
Hybrid Manufacturing Technologies—Utilizing Nanoimprint Lithography for High Rate/Volume Production of Nano-Enabled Plastic Components

Nikolaos Kehagias 1

1 Catalan Institute of Nanoscience and Nanotechnology, CSIC and The Barcelona Institute of Science and Technology Barcelona Spain

Show Abstract

9:30 AM - PM5.1.04
Experiments towards Establishing of Design Rules for R2R-UV-NIL with Polymer Working Shims

Dieter Nees 1 , Stephan Ruttloff 1 , Ursula Palfinger 1 , Barbara Stadlober 1

1 Joanneum Research Graz Austria

Show Abstract

9:45 AM - *
Break

10:15 AM - *PM5.1.05
Large Area Flexible Biomimetic Surfaces

Kenneth Carter 1

1 Department of Polymer Science and Engineering, Department of Chemical Engineering University of Massachusetts Amherst United States

Show Abstract

10:45 AM - PM5.1.06
Large-Scale and Flexible Nanogenerators Based on ZnO Conical Nanostructures by Nano-Imprint Lithography and Atomic Layer Deposition

David Spirito 1 2 , Emmanuel Defay 1 , Kevin Menguelti 1 , Jens Kreisel 1 2 , Damien Lenoble 1

1 Luxembourg Institute of Science and Technology Esch-sur-Alzette Luxembourg, 2 University of Luxembourg Esch-sur-Alzette Luxembourg

Show Abstract

11:00 AM - PM5.1.07
Templated Solid-State Dewetting on Block Copolymer Patterns for Scalable Fabrication of Metal Nanoparticle Arrays

Mostafa Bedewy 1 2 , Hyung Wan Do 1 , Sarah Goodman 1 , Karl Berggren 1

1 Massachusetts Institute of Technology Cambridge United States, 2 University of Pittsburgh Pittsburgh United States

Show Abstract

11:15 AM - PM5.1.08
High-Voltage Electrostatic Capacitors as a Model System for Investigating Template-Free Printing of Passive Components

James Hardin 1 2 , Christopher Grabowski 1 2 , Matthew Lucas 1 3 , John Berrigan 1 , Michael Durstock 1

1 Air Force Research Laboratory Wright-Patterson AFB United States, 2 UES Inc. Beavercreek United States, 3 Universal Technology Corporation Beavercreek United States

Show Abstract

11:30 AM - *PM5.1.09
Roll-to-Roll Nanofabrication Processes for Flexible Electronics and Biomedical Applications

S.V. Sreenivasan 1

1 NASCENT Center University of Texas at Austin Austin United States

Show Abstract

PM5.2: Transistors/Interconnects/Electrodes
Session Chairs
Thomas Blaudeck
Mark D. Poliks
Monday PM, November 28, 2016
Hynes, Level 1, Room 109

1:30 PM - *PM5.2.01
Flexible and Printed Organic TFT Devices and their Applications

Shizuo Tokito 1

1 Research Center for Organic Electronics Yamagata University Yamagata Japan

Show Abstract

2:00 PM - *PM5.2.02
Hybrid Integration of High Performance Micro-Scale Devices by Micro Transfer Printing

Christopher Bower 1

1 X-Celeprint Inc. Cork Ireland

Show Abstract

2:30 PM - PM5.2.03
Fully Printable Nanowire Transistors for Sensor Applications

Grigorios-Panagiotis Rigas 1 2 , Marios Constantinou 1 , Brian A. Korgel 3 , Michael P. Hughes 4 , Fernando Castro 2 , Maxim Shkunov 1

1 Advanced Technology Institute University of Surrey Guildford United Kingdom, 2 Materials Division National Physical Laboratory Teddington United Kingdom, 3 University of Texas at Austin Austin United States, 4 Mechanical Engineering University of Surrey Guildford United Kingdom

Show Abstract

2:45 PM - PM5.2.05
Evaluation of Rotary Screen Printed High Density Interconnects for R2R Fabricated Hybrid Systems

Thomas Kraft 1 , Terho Kololuoma 2 , Jukka Hast 2 , Matti Mantysalo 1

1 Tampere University of Technology Tampere Finland, 2 VTT Technical Research Centre of Finland Ltd. Oulu Finland

Show Abstract

3:30 PM - *PM5.2.06
Proving Scalability of Fully Roll-to-Roll Gravure Printed Carbon Nanotube and PBTTT Based Active Matrix Backplanes for Smart Sensor Arrays and Digital Paper

Gyoujin Cho 1

1 Department of Printed El Sunchon National University Sunchon Korea (the Republic of)

Show Abstract

4:00 PM - PM5.2.07
Micrometer-Resolution Plate-to-Roll Flexographic Printing of High-Conductivity Transparent Electrodes

Sanha Kim 1 , Dhanushkodi Mariappan 1 , Hossein Sojoudi 1 , Hangbo Zhao 1 , Karen Gleason 1 , A. John Hart 1

1 Massachusetts Institute of Technology Cambridge United States

Show Abstract

4:00 PM -
DISCUSSION TIME

4:15 PM - PM5.2.08
High Aspect Ratio Nanopatterned Transparent Electrode via Capillarity Assisted Ag Nanoparticle Assembly

Juhoon Kang 1 2 , Chang-Goo Park 3 4 , Su-Han Lee 3 , Dae Geun Choi 3 , Changsoon Cho 1 2 , Jung-Yong Lee 1 2

1 Graduate School of Energy, Environment, Water, and Sustainability Korea Advanced Institute of Science and Technology Daejeon Korea (the Republic of), 2 Graphene Research Center Korea Advanced Institute of Science and Technology Daejeon Korea (the Republic of), 3 Nano-Mechanical Systems Research Division Korea Institute of Machinery and Materials Daejeon Korea (the Republic of), 4 Department of Nano-Mechatronics University of Science and Technology Daejeon Korea (the Republic of)

Show Abstract

4:30 PM - PM5.2.09
Simple, Continuous Patterning of Cu NW-Based Transparent Conducting Electrodes for Use in Flexible Electronic Applications

Zhaoyang Zhong 1 2 , Hyungjin Lee 3 , Dongwoo Kang 2 , Sin Kwon 2 , Inhyuk Kim 1 , Kwangyoung Kim 2 , Youngu Lee 3 , Kyoohee Woo 2 , Jooho Moon 1

1 Yonsei University Seoul Korea (the Republic of), 2 Advanced Manufacturing Systems Research Division Korea Institute of Machinery and Materials Daejeon Korea (the Republic of), 3 Department of Energy Systems Engineering Daegu Gyeongbuk Institute of Science and Technology Daegu Korea (the Republic of)

Show Abstract

PM5.3: Poster Session
Session Chairs
Mark D. Poliks
James Watkins
Monday PM, November 28, 2016
Hynes, Level 1, Hall B

8:00 PM - PM5.3.01
Deformed Microcavity of Dye-Doped Polymers Fabricated by Femtosecond Laser Direct Writing and Self-Assembled Process

Xue-Peng Zhan 1 , Zhen-Yu Zhang 1 , Ming Xu 1 , Huai-Liang Xu 1 , Hong-Bo Sun 1

1 Jilin University Changchun China

Show Abstract

8:00 PM - PM5.3.02
Sub-Micron Patterning of Polymer Brushes arising from the Inkjet Printing of Polyelectrolyte Macroinitiators

Adam Parry 1 , Alexander Straub 1 3 , Eva Villar-Alvarez 1 4 , Takdanai Phengphol 2 , Jonathan Nicoll 1 , Xavier Lim 1 , Lianne Jordan 1 , Katie Moore 2 , Pablo Taboada 4 , Stephen Yeates 1 , Steve Edmondson 2

1 School of Chemistry University of Manchester Manchester United Kingdom, 3 Makromolekulare Chemie Universitat Freiburg Freiburg Germany, 4 Departmento de Fisica de la Materia Condensada Universidade de Santiago de Compostela Satuiago de Compostela Spain, 2 School of Materials University of Manchester Manchester United Kingdom

Show Abstract

8:00 PM - PM5.3.03
Synthesis, Formulation and Rapid Curing of Particles Based Inkjet and Aerosol-Jet Printed Films for Electronic and Sensory Devices.

Marco Fritsch 1 , Mykola Vinnichenko 1 , Viktar Sauchuk 1 , Nikolai Trofimenko 1

1 Fraunhofer IKTS Dresden Germany

Show Abstract

8:00 PM - PM5.3.04
High Throughput Zn-Mg Coatings by Roll-to-Roll EML-PVD Process

KyoungPil Ko 1 , Kyung-Hoon Nam 1 , YongHwa Jung 1 , DongYeoul Lee 1 , SeokJoon Hong 1 , YoungJin Kwak 1 , MoonJong Eum 1 , SukWon Cho 1 , TaeYeob Kim 1

1 POSCO Technical Research Laboratories Gwangyang-si Korea (the Democratic People's Republic of)

Show Abstract

8:00 PM - PM5.3.05
The Rational Design of Structural Topography for Directed Janus Droplet at High Temperature

Jing Li 1 , Zuankai Wang 1

1 City University of Hong Kong Hong Kong China

Show Abstract

8:00 PM - PM5.3.06
Gradient Surfaces with Two-Tier Roughness for Long-Range Droplet Self-Propulsion

Jing Li 1 , Chaoran Liu 2 , Xiaofeng Zhou 2 , Zuankai Wang 1

1 City University of Hong Kong Hong Kong China, 2 Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Science Shanghai China

Show Abstract

8:00 PM - PM5.3.07
Investigating Kinetic and Thermodynamic Effects on Self-Stratifying Polymer Blend

Samantha Rinehart 1 , Mark Dadmun 1 2

1 University of Tennessee Knoxville United States, 2 Oak Ridge National Laboratory Oak Ridge United States

Show Abstract

8:00 PM - PM5.3.08
ITO Nanoparticle Mist Deposition(NMD) System for Roll-to-Roll Process

Yasutaka Nishi 1 , Makoto Nakazumi 1 , Koichiro Iwahori 1 , Masaki Kato 1 , Kei Nara 1

1 Nikon Corporation Sagamihara Japan

Show Abstract

8:00 PM - PM5.3.09
Controlled Nanoparticle Organization in Polymer Films

Ren Zhang 1 , Bongjoon Lee 2 , Michael Bockstaller 2 , Christopher Stafford 3 , Jack Douglas 3 , Alamgir Karim 1

1 University of Akron Akron United States, 2 Carnegie Mellon University Pittsburgh United States, 3 Center for Neutron Research Gaitherburg United States

Show Abstract

8:00 PM - PM5.3.10
Inkjet-Printed NiZn-Ferrite Films Embedded into Plastic Substrate for Flexible Wireless Power Transfer Module

Murali Bissannagari 1 , Youngwoo Lee 1 , Jihoon Kim 1

1 Kongju National University Cheonan-si Korea (the Republic of)

Show Abstract

8:00 PM - PM5.3.11
Graphene-Polypyrrole Nanocomposite Electrodes for Paper-Based Supercapacitors

Alptekin Aydinli 1 , Recep Yuksel 1 , Husnu Unalan 1

1 Middle East Technical University Ankara Turkey

Show Abstract

8:00 PM - PM5.3.12
Ink-Jet Printing of Vertically Stacked Redox Cycling Sensor

Nouran Adly 1 , Bernd Bachmann 1 , Andreas Offenhausser 1 , Bernhard Wolfrum 1 2 , Alexey Yakushenko 1

1 Institute of Bioelectronics Forschungszentrum Jülich Julich Germany, 2 Neuroelectronics, IMETUM, Department of Electrical and Computer Engineering Technical University of Munich Munich Germany

Show Abstract

8:00 PM - PM5.3.13
Ultrathin Polymer Coating for Improving Mechanical Performance of High Temperature Glass Dielectrics

Maryam Sarkarat 1 , Lucas Shook 1 , Mengxue Yuan 1 , Muhammad Risya Hasyim 1 , Shihai Zhang 2 , Ramakrishnan Rajagopalan 1 , Michael Lanagan 1 , Amir Reza Aref Laleh 1

1 Material Research Institute The Pennsylvania State University State College United States, 2 Polyk Technologies State College United States

Show Abstract

8:00 PM - PM5.3.14
Stability and Opto-Electronic Properties of Nickel Oxide—Silver Nanowire Nanocomposite Electrodes

Sahin Coskun 1 , Husnu Unalan 1 , Jiaxing Huang 2

1 Metallurgical and Materials Engineering Middle East Technical University Ankara Turkey, 2 Department of Materials Science and Engineering Northwestern University Evanston United States

Show Abstract

8:00 PM - PM5.3.15
Prototyping of Mesoscale Periodic Structures by Benchtop Blade Coating

Michael Deagen 1 , Linda Schadler 1 , Chaitanya Ullal 1

1 Rensselaer Polytechnic Institute Troy United States

Show Abstract

8:00 PM - PM5.3.16
Centro-Apical Self-Organization of Organic Semiconductors in a Printed Organic Semiconductor:Polymer Blend and Its Application to Highly Sensitive Pressure Sensors

Jung Ah Lim 1 , So Young Yeo 1 , Do Hwan Kim 2 , Yeonjin Yi 3

1 Korea Institute of Science and Technology Seoul Korea (the Republic of), 2 SoongSil University Seoul Korea (the Republic of), 3 Yonsei University Seoul Korea (the Republic of)

Show Abstract

8:00 PM - PM5.3.17
Effects of Residence Time on Growth Characteristics and Properties of Amorphous Carbon Films Grown by Radical-Injection Plasma-Enhanced Chemical Vapor Deposition

Hirotsugu Sugiura 1 , Lingyun Jia 1 , Shunichi Sato 1 , Hiroki Kondo 1 , Keigo Takeda 1 , Kenji Ishikawa 1 , Makoto Sekine 1 , Masaru Hori 1

1 Nagoya University Nagoya Japan

Show Abstract

8:00 PM - PM5.3.18
Fabrication of High-Performance and Embedded Metal Grid Transparent Conductors via Deformation-Assisted Direct Imprinting of Thermally Reduced Ag Nanoparticles

Yong Suk Oh 1 , Dong Yun Choi 1 , Sung-Uk Lee 1 , Hojin Kim 2 , Inkyu Park 1 , Hyung Jin Sung 1

1 Korea Advanced Institute of Science and Technology Daejeon Korea (the Republic of), 2 Pohang University of Science and Technology Pohang Korea (the Republic of)

Show Abstract

8:00 PM - PM5.3.19
Inkjet Printing Ultra-Large Graphene Oxide Flakes

Pei He 1 , Brian Derby 1

1 University of Manchester Manchester United Kingdom

Show Abstract

8:00 PM - PM5.3.20
Development of Self-Healing Coating Materials with Shape Memory Urethane Polymers

Teruyoshi Hirano 1 2 , Satoru Hashimoto 3

1 GGK Inc Tokyo Japan, 2 HIRANO Consulting Engineer Office Tokyo Japan, 3 Hyoukaken Co., Ltd. Tokyo Japan

Show Abstract

8:00 PM - PM5.3.21
Continous-Flow Direct Writing of Hybrid TiO 2 Flexible Photo-Electrodes—Processing, Microstructure and Functionality Interrelations

Maria Torres Arango 1 , Domenic Cipollone 1 , Lynnora Grant 1 , Dimitris Korakakis 2 , Konstantinos Sierros 1

1 Flexible Electronics for Sustainable Technologies (FEST) Lab, Mechanical and Aerospace Engineering West Virginia University Morgantown United States, 2 Lane Department of Computer Science and Electrical Engineering West Virginia University Morgantown United States

Show Abstract

8:00 PM - PM5.3.22
All Spray-Coated Thin Film Transistors Based on High Capacitance Ion Gel Electrolytes

Yeong Kwan Kwon 1 , Hyun Je Kim 1 , Hae Min Yang 1 , Dong Hui Lee 1 , Kihyon Hong 2 , Keun Hyung Lee 1

1 Inha University Incheon Korea (the Republic of), 2 Korea Institute of Materials Science Changwon Korea (the Republic of)

Show Abstract

8:00 PM - PM5.3.23
Green Formulation of Gold Nanoparticle Inks Using Starch for Inkjet Printing

Nikita Bacalzo 1 , Erwin Enriquez 1

1 Ateneo de Manila University Quezon City Philippines

Show Abstract

8:00 PM - PM5.3.24
Surface-Energy-Controlled Nanoscale Coating of ALD REO for R2R Printed Electronics System

Il-Kwon Oh 1 , Hyungjun Kim 1 , Han-Bo-Ram Lee 2

1 Yonsei University Seoul Korea (the Republic of), 2 Incheon University Incheon Korea (the Republic of)

Show Abstract

8:00 PM - PM5.3.25
Flexible Silver Nanowire Networks for High Frequency Shielding

Ece Alpugan 1 , Sahin Coskun 1 , Arcan Dericioglu 1 , Husnu Unalan 1

1 Metallurgical and Materials Engineering Middle East Technical University Ankara Turkey

Show Abstract

8:00 PM - PM5.3.26
Hierarchical Metal Nanomesh/Microgrid Structures for High Performance Transparent Electrodes

Tongchuan Gao 1 , Po-Shun Huang 1 , Jung-Kun Lee 1 , Paul Leu 1

1 University of Pittsburgh Pittsburgh United States

Show Abstract

8:00 PM - PM5.3.27
Continuous Fabrication of Scalable 2D Nanopatterns by Sequential 1D Patterning Strokes for Electronic and Biosensing Applications

Jong Ok 1 , Ashwin Panday 2 , Long Chen 2 , Lingjie Guo 2

1 Seoul National University of Science and Technology Seoul Korea (the Republic of), 2 University of Michigan Ann Arbor United States

Show Abstract

8:00 PM - PM5.3.28
Fabrication of Adaptable Biomimetic Nanofur for Multifunctional Oil/Water Separation

Claudia Zeiger 1 , Jana Kumberg 1 , Felix Vuellers 1 , Alexander Storz 1 , Matthias Worgull 1 , Hendrik Hoelscher 1 , Maryna Kavalenka 1

1 Karlsruhe Institute of Technology Eggenstein-Leopoldshafen Germany

Show Abstract

2016-11-29   Show All Abstracts

Symposium Organizers

James Watkins, Univ of Massachusetts
Karen Chong, Institute of Materials Research and Engineering (IMRE) / A-STAR
Jukka Hast, VTT Printed Intelligence
Mark D. Poliks, Binghamton University

Symposium Support

State University of New York at Binghamton (Center for Advanced Microelectronics Manufacturing, CAMM)
University of Massachusetts Amherst (Center for Hierarchical Manufacturing, CHM)

PM5.4: Devices and Integration
Session Chairs
Jukka Hast
Jeff Morse
Tuesday AM, November 29, 2016
Hynes, Level 1, Room 109

8:15 AM - *PM5.4.01
Printable Thin-Film and E-Textile Sensors for Health-Monitoring Applications

Takao Someya 1 , Naoji Matsuhisa 1 , Hanbit Jin 1 , Tomoyuki Yokota 1

1 Electrical and Electronic Engineering and Information Systems University of Tokyo Tokyo Japan

Show Abstract

8:45 AM - PM5.4.02
Tattoo-Paper Transfer for Ingestible Electronics—A Versatile Platform for Edible All-Printed Field-Effect Transistors

Giorgio Bonacchini 1 2 , Caterina Bossio 1 , Maria Rosa Antognazza 1 , Guglielmo Lanzani 1 2 , Mario Caironi 1

1 Center for Nanoscience and Technology Istituto Italiano di Tecnologia Milan Italy, 2 Department of Physics Politecnico di Milano Milan Italy

Show Abstract

9:00 AM - *PM5.4.03
From Materials Deposition to Flexible Systems—Integrating Devices with Printing Technologies

Aminy Ostfeld 1 , Abhinav Gaikwad 1 , Yasser Khan 1 , Ana Claudia Arias 1

1 University of California, Berkeley Berkeley United States

Show Abstract

9:30 AM - PM5.4.04
Nanoscale Ink Transfer in High-Resolution Flexographic Printing Using Nanoporous Stamps

Dhanushkodi Mariappan 1 , Sanha Kim 1 , Hossein Sojoudi 2 3 , Hangbo Zhao 1 , Gareth McKinley 2 , Karen Gleason 3 , Pierre T. Brun 4 , A. John Hart 1

1 Department of Mechanical Engineering and Laboratory for Manufacturing and Productivity Massachusetts Institute of Technology Cambridge United States, 2 Department of Mechanical Engineering Massachusetts Institute of Technology Cambridge United States, 3 Department of Chemical Engineering Massachusetts Institute of Technology Cambridge United States, 4 Department of Mathematics Massachusetts Institute of Technology Cambridge United States

Show Abstract

9:45 AM - PM5.4.05
3D Printing of Polymer-Inorganic Hybrid Dielectrics for Millimeter Wave RF Devices

Maxwell Plaut 1 , Michael Lis 1 , Andrew Zai 1 , David Cipolle 1 , John Russo 1 , Jennifer Lewis 2 , Theodore Fedynyshyn 1

1 Lincoln Laboratory Massachusetts Institute of Technology Lexington United States, 2 Harvard University Cambridge United States

Show Abstract

10:00 AM - *
Break

10:30 AM - *PM5.4.06
Optical Sensors Fabricated by Wafer-Level Integration and Functionalization of Carbon Nanotubes

Thomas Blaudeck 1 , David Adner 1 , Raul Rodriguez 1 2 , Andrea Preuss 1 , Sascha Hermann 1 2 , Dietrich Zahn 1 2 , Heinrich Lang 1 2 , Stefan Schulz 1 2 3

1 Chemnitz University of Technology Chemnitz Germany, 2 Center for Advancing Electronics Dresden Chemnitz Germany, 3 Fraunhofer-Institut für Elektronische Nanosysteme ENAS Chemnitz Germany

Show Abstract

11:00 AM - PM5.4.07
Printed Carbon Separators and Current Collectors for Printed Silver-Oxide Batteries

Rajan Kumar 2 , Kevin Johnson 3 , William Scheideler 1 , Vivek Subramanian 1

2 Department of Materials Science and Engineering University of California, Berkeley Berkeley United States, 3 University of California, Santa Cruz Santa Cruz United States, 1 Department of Electrical Engineering and Computer Sciences University of California, Berkeley Berkeley United States

Show Abstract

11:15 AM - *PM5.4.08
Next Generation Printed Electronics

Janos Veres 1

1 Novel and Printed Electronics PARC a Xerox Company Palo Alto United States

Show Abstract

11:45 AM - PM5.4.09
Inkjet-Printed Flexible Active Multilayered Structures

Charles Trudeau 1 2 , Martin Bolduc 1 , Patrick Beaupre 1 , Sylvain Dubois 1 , Patrice Topart 1 , David Gay 1 , Sylvain Cloutier 2 , Christine Alain 1

1 Institut National d'Optique Quebec Canada, 2 Electrical Engineering Ecole de Technologie Superieure Montreal Canada

Show Abstract

PM5.5: Processing with Light
Session Chairs
Jukka Hast
James Watkins
Tuesday PM, November 29, 2016
Hynes, Level 1, Room 109

1:30 PM - *PM5.5.01
Laser Direct Writing of Gas Sensors with Carbon Materials Sensing Layers

Thomas Lippert 1

1 Research with Neutrons and Muons Division Paul Scherrer Institute Villigen Switzerland

Show Abstract

2:00 PM - PM5.5.02
Rapid, Large-Area Synthesis of Hierarchical Nanoporous Hybrid Films on Flexible Substrates by Photothermal Processing

Dong-Po Song 1 , Aditi Naik 1 , James Watkins 1

1 University of Massachusetts Amherst United States

Show Abstract

2:15 PM - PM5.5.03
Laser Processing for the Patterning of Electroactive Surfaces toward Preferential Cell Adhesion and Growth

David Ohayon 1 , Charalampos Pitsalidis 2 , Adel Hama 1 , Anna-Maria Pappa 1 , Jolien Pas 1 , George Malliaras 1 , Laurent Gallais 2 , Roisin Owens 1

1 Department of Bioelectronics Ecole Nationale Supérieure des Mines Gardanne France, 2 Aix Marseille Université, CNRS, Centrale Marseille, Institut Fresnel Marseille France

Show Abstract

2:30 PM - PM5.5.04
Instantaneous Photonic Synthesis and Rapid Photothermal Treatment of Three-Dimensional Nanostructured Titanium Dioxide Thin Film through Pulsed Light Irradiation

Sijun Luo 1 , Brian Riggs 1 , Shiva Adireddy 1 , Joshua Shipman 1 , Briley Bourgeois 1 , Stan Farnsworth 2 , Douglas Chrisey 1

1 Tulane University New Orleans United States, 2 NovaCentrix Austin United States

Show Abstract

2:45 PM - *
Break

3:15 PM - PM5.5.05
Millisecond Laser Functionalization of the Structures Prepared Using Wet Chemical Deposition

Mykola Vinnichenko 1 , Viktar Sauchuk 1 , Marco Fritsch 1 , Dirk Hauschild 2 , Nikolai Trofimenko 1 , MIhails Kusnezoff 1

1 Fraunhofer IKTS Dresden Germany, 2 LIMO Lissotschenko Mikrooptik GmbH Dortmund Germany

Show Abstract

3:30 PM - PM5.5.06
Focused Laser Spike Dewetting of Metallic Thin Films

Tianxing Ma 1 , Jonathan Singer 1

1 Rutgers University Piscataway United States

Show Abstract

3:45 PM - PM5.5.07
A New Approach to Surface Nano-Patterning—Controlled Transitions between “Normal” and “Anomalous” Laser-Induced Periodic Surface Structures

Ihor Pavlov 1 , Ozgun Yavuz 1 , Ghaith Makey 1 , Onur Tokel 1 , Omer Ilday 1

1 Bilkent University Ankara Turkey

Show Abstract

4:00 PM - PM5.5.08
Pulsed Laser Shock Engineering of Metallic Arrays with Ultrafine Nanogaps

Yaowu Hu 1 , Yi Xuan 1 , Xiaolei Wang 1 , Gary Cheng 1

1 Purdue University West Lafayette United States

Show Abstract

4:15 PM - PM5.5.09
Combining Plasma Synthesis with Intense Pulsed Light Annealing for Rapid Nonthermal Production of Conductive ZnO Nanocrystal Networks

Benjamin Greenberg 1 , Claudia Gorynski 2 , Zachary Robinson 3 , Bryan Voigt 4 , Lorraine Francis 4 , Eray Aydil 4 , Uwe Kortshagen 1

1 Mechanical Engineering University of Minnesota Minneapolis United States, 2 Mechanical and Process Engineering University of Duisburg-Essen Duisburg Germany, 3 Physics University of Minnesota Minneapolis United States, 4 Chemical Engineering and Materials Science University of Minnesota Minneapolis United States

Show Abstract

2016-11-30   Show All Abstracts

Symposium Organizers

James Watkins, Univ of Massachusetts
Karen Chong, Institute of Materials Research and Engineering (IMRE) / A-STAR
Jukka Hast, VTT Printed Intelligence
Mark D. Poliks, Binghamton University

Symposium Support

State University of New York at Binghamton, University of Massachusetts Amherst (Center for Hierarchical Manufacturing)
PM5.6: Lighting and Optical Applications
Session Chairs
Jeff Morse
Mark D. Poliks
Wednesday AM, November 30, 2016
Hynes, Level 1, Room 109

9:00 AM - *PM5.6.01
Towards High-Throughput Coating and Printing of Light-Emitting Electrochemical Cells

Ludvig Edman 1

1 The Organic Photonics and Electronics Group Umeå University Umea Sweden

Show Abstract

9:30 AM - PM5.6.02
Large Area Flexible Lighting Elements Manufactured by Roll-to-Roll Compatible Processes

Kimmo Keranen 1 , Jyrki Ollila 1 , Sami Ihme 1 , Eveliina Juntunen 1 , Jukka-Tapani Makinen 1 , Kari Ronka 1

1 VTT Technical Research Centre of Finland Oulu Finland

Show Abstract

9:45 AM - PM5.6.03
All-Printed Full-Color OPD Array with a Single Organic Active Layer

Igal Deckman 1 , Pierre Lechene 1 , Adrien Pierre 1 , Ana Claudia Arias 1

1 University of California, Berkeley Berkeley United States

Show Abstract

10:00 AM - PM5.6.04
Roll-to-Roll Printed Electronics for Standalone Smart Windows

Francesco Pastorelli 1

1 Technical University of Denmark Roskilde Denmark

Show Abstract

10:15 AM - PM5.6.05
Development Process and Design Rules of Inkjet-Printed Silver Grid Electrodes for Use in Highly Efficient Solution-Processed ITO-Free OLEDs

Felix Hermerschmidt 1 , Ignasi Burgués-Ceballos 2 , Lukas Kinner 3 , Stefan Sax 3 , Gerburg Schider 3 , Christine Boeffel 4 , Stelios Choulis 2 , Emil List-Kratochvil 1

1 Humboldt-Universität zu Berlin Berlin Germany, 2 Cyprus University of Technology Limassol Cyprus, 3 NanoTecCenter Weiz Forschungsgesellschaft mbH Weiz Austria, 4 Fraunhofer Institute for Applied Polymer Research Potsdam-Golm Germany

Show Abstract

10:30 AM - *
Break

11:00 AM - PM5.6.06
High Volume Solution Based Roll-to-Roll Processing of OLEDS

Pim Groen 1 , Robert Abbel 1 , Joanne Wilson 1 , Ike De Vries 1

1 Holst Centre Eindhoven Netherlands

Show Abstract

11:15 AM - PM5.6.07
PDMS-Paraffin/Graphene Laminated Films with Electrothermally Switchable Haze

Jae Yeol Park 1 , Jeong Yong Lee 1 , Tae June Kang 2

1 Korea Advanced Institute of Science and Technology Daejeon Korea (the Republic of), 2 Inha university Incheon Korea (the Republic of)

Show Abstract

11:30 AM - PM5.6.08
Kirigami-Inspired Nanocomposite Manufacturing for Tunable Optical Gratings

Lizhi Xu 1 , Xinzhi Wang 1 , Nicholas Kotov 1

1 University of Michigan Ann Arbor United States

Show Abstract

11:45 AM - PM5.6.09
Low-Cost, Large-Area Patterning of Metasurfaces with Off-Axis Microsphere Photolithography

Chuang Qu 1 , Edward Kinzel 1

1 Missouri University of Science and Technology Rolla United States

Show Abstract

PM5.7: Large Area and High Temperature Processing
Session Chairs
Pavel Dutta
Mark D. Poliks
Wednesday PM, November 30, 2016
Hynes, Level 1, Room 109

1:30 PM - *PM5.7.01
R2R CVD Architecture and Processes for Barrier Packaging of Next Generation Display Devices

F. Pieralisi 1 , Neil Morrison 1 , T. Stolley 1 , G. Steiniger 1 , M. Schaefer 1 , J. Degenhardt 1

1 Applied Materials WEB Coating GmbH Alzenau Germany

Show Abstract

2:00 PM - PM5.7.02
Integration of ALD and CVD Processes into One-Chamber—Depositing Inorganic-Organic Hybrid Layer with High-Throughput and Reliability

Hyejeong Seong 1 , Bong Jun Kim 1 , Hongkeun Park 1 , Sung Gap Im 1

1 Korea Advanced Institute of Science and Technology Daejeon Korea (the Republic of)

Show Abstract

2:15 PM - PM5.7.03
High Speed Roll-to-Roll Production of Atomically Thin (2D) Materials Using a Split Zone CVD Reactor

Piran Ravichandran Kidambi 1 , Dhanushkodi Mariappan 1 , Andrey Vyatskikh 1 , Martin Feldmann 1 , A. John Hart 1

1 Massachusetts Institute of Technology Cambridge United States

Show Abstract

3:30 PM - PM5.7.04
Roll-to-Roll Processing of Single-Crystalline-Like III-V, Si and Ge Thin Films on Flexible Metal Substrates for Low-Cost and High-Performance Opto-Electronic Device Applications

Pavel Dutta 1 , Monika Rathi 1 , Ying Gao 1 , Yongkuan Li 1 , Sicong Sun 1 , Yao Yao 1 , Devendra Khatiwada 1 , Ali Khadimallah 1 , Venkat Selvamanickam 1

1 University of Houston Houston United States

Show Abstract

3:45 PM - PM5.7.05
High Throughput, Room Temperature Synthesis of Cluster Assembled Nanostructured Nanocrystalline Silicon Films

Giorgio Nava 1 , Francesco Fumagalli 1 , Salvatore Gambino 4 , Davide Beretta 1 , Gabriella Cavallo 2 , Giancarlo Terraneo 2 , Giorgio Divitini 3 , Adriano Cola 5 , Fabio Di Fonzo 1

1 Center for Nanoscience and Technology Milano Italy, 4 Università del Salento Lecce Italy, 2 Politecnico di Milano Milano Italy, 3 Darwin College, Cambridge Cambridge United Kingdom, 5 CNR Lecce Italy

Show Abstract

4:00 PM - PM5.7.06
Large-Area Nanopartice Film Deposition via Hypersonic Particle Deposition

Peter Firth 1 2 , Zachary Holman 1 2

1 Arizona State University Tempe United States, 2 Swift Coat Phoenix United States

Show Abstract

4:15 PM - PM5.7.07
Printable Carbon Nanotube Microstructures for Ultra-Flexible Li-Ion Batteries

Shahab Ahmad 1 , Davor Copic 1 , Simon Engelke 1 , Chandramohan George 1 , Michael Volder 1

1 Department of Engineering University of Cambridge Cambridge United Kingdom

Show Abstract

4:15 PM -
DISCUSSION TIME

4:30 PM - PM5.7.08
High-Performance Low-Voltage Complementary Differential Amplifiers on Foil via Solution-Processed Hybrid Organic/Metal-Oxide Integration

Vincenzo Pecunia 1 2 , Iyad Nasrallah 2 , Mark Nikolka 2 , Henning Sirringhaus 2

1 Institute of Functional Nano and Soft Materials Soochow University Suzhou China, 2 Cavendish Laboratory University of Cambridge Cambridge United Kingdom

Show Abstract

4:45 PM - PM5.7.09
Considerations and Methodology to Determine R2R Manufacturing and Scaling of Electronic Devices on Flexible Stainless Steel Foil Substrates

Aditi Chandra 1 , Mao Takashima 1 , Raghav Sreenivasan 1 , Patricia Beck 1 , Scott Bruner 1 , Arvind Kamath 1

1 Thinfilm Electronics San Jose United States

Show Abstract

2016-12-01   Show All Abstracts

Symposium Organizers

James Watkins, Univ of Massachusetts
Karen Chong, Institute of Materials Research and Engineering (IMRE) / A-STAR
Jukka Hast, VTT Printed Intelligence
Mark D. Poliks, Binghamton University

Symposium Support

State University of New York at Binghamton, University of Massachusetts Amherst (Center for Hierarchical Manufacturing)
PM5.8: PVs and TCOs
Session Chairs
Pavel Dutta
Jeff Morse
Thursday AM, December 01, 2016
Hynes, Level 1, Room 109

8:30 AM - PM5.8.01
Scalability Challenge—Low-Temperature Inkjet Printed Perovskite Solar Cells with Graphene Electrodes

Anna Osherov 1 , Yi Song 1 , Jing Kong 1 , Vladimir Bulovic 1

1 Massachusetts Institute of Technology Cambridge United States

Show Abstract

8:45 AM - PM5.8.02
In Situ Elucidation of the Mechanism of Solvent-Vapor Annealing of High-Performance Small-Molecule Bulk-Heterojunction Solar Cells

Lee Richter 1 , Hyun Ro 1 , Sebastian Engmann 1 , Andrew Herzing 1 , Paul Geraghty 2 , David Jones 2

1 National Institute of Standards and Technology Gaithersburg United States, 2 University of Melborne Parkville Australia

Show Abstract

9:00 AM - PM5.8.03
Illumination Alters the Gelation of Optoelectronic Materials

Brian Morgan 1 , Mark Dadmun 1 2

1 University of Tennessee Knoxville United States, 2 Oak Ridge National Laboratory Oak Ridge United States

Show Abstract

9:15 AM - PM5.8.04
Inkjet Printed Silver Nanowire Electrodes for Visually Non-Obstructive and Efficient Semitransparent Organic Solar Cells and Modules

Kai Cheong Tam 1 , Philipp Maisch 1 , Luca Lucera 1 , Hans-Joachim Egelhaaf 1 , Christoph Brabec 2

1 ZAE Bayern Nürnberg Germany, 2 Friedrich-Alexander University Erlangen-Nürnberg Erlangen Germany

Show Abstract

9:30 AM - *
Break

10:00 AM - PM5.8.05
Scalable Organic Solar Module Fabrication—A Comparison of Digitally Printed and LASER Patterned Interconnects

Philipp Maisch 1 , Kai Cheong Tam 1 , Luca Lucera 1 , Peter Kubis 1 , Hans-Joachim Egelhaaf 1 , Christoph Brabec 1 2

1 ZAE Bayern Nürnberg Germany, 2 Materials for Electronics and Energy Technology Friedrich-Alexander University Erlangen-Nürnberg Erlangen Germany

Show Abstract

10:15 AM - PM5.8.06
Bilayer Interdiffused Heterojunction Organic Photodiodes Fabricated Using Double Transfer Stamping

Hyunsoo Kim 1 , Jerzy Kanicki 1 , Byeongseop Song 1 , Kyusang Lee 2 , Stephen Forrest 1

1 University of Michigan Ann Arbor United States, 2 University of Virginia Charlottesville United States

Show Abstract

10:30 AM - PM5.8.07
A Comparative Study on Deposition of FTO Thin Films by Conventional and Ultrasonic Spray Pyrolysis Methods for Dye Sensitized Solar Modules

Kerem Cagatay Icli 1 , Ahmet Macit Ozenbas 1

1 Orta Dogu Teknik University Ankara Turkey

Show Abstract

10:45 AM - PM5.8.08
Fabrication of High-Performance, Embedded Hybrid Metallic Transparent Conductors Based on Ag NW-Grid Using Deformation-Assisted Direct Imprinting of Ag Ion Ink

Yong Suk Oh 1 , Hyunwoo Lee 1 , Dong Yun Choi 1 , Sung-Uk Lee 1 , Hojin Kim 2 , Seunghyup Yoo 1 , Inkyu Park 1 , Hyung Jin Sung 1

1 Korea Advanced Institute of Science and Technology Daejeon Korea (the Republic of), 2 Pohang University of Science and Technology Pohang Korea (the Republic of)

Show Abstract