F20 Landing Banner 1400x275

Call for Papers

Abstracts were due June 15, 2020.

Symposium F.EN06—Advancement of Lithium-Based High-Energy Density Batteries at Multiple Scales, Factoring in Safety

Lithium-ion batteries are the dominant power source for portable electronics and are quickly penetrating electric vehicle and grid energy storage markets. To increase the deployment of advanced battery technologies for large scale energy storage, battery energy density and safety are two key considerations. From the perspective of energy density, silicon anodes and rechargeable Li metal battery technology have been extensively studied recently and demonstrated promise in combination with high energy cathode materials. However, long-term cyclability and the associated dendrite problems of a Li anode under realistic conditions are major obstacles for practical applications. Innovative approaches from new materials, electrolytes, and electrode design are urgently needed. In addition, cell safety at high energy conditions is critical to the advancement of rechargeable batteries, requiring deeper examination of failure mechanisms across multiple scales.

Toward that end, this symposium will cover current and emerging technologies to: 1) extend cycle life of high-energy Li batteries with advanced liquid or solid electrolytes, and 2) increase battery safety and resilience during operation. The topics include, but are not limited to, new concepts of high energy materials, electrolytes ranging from liquid to polymer to solid state, new fundamental understanding of both materials and interfaces, and new designs to enable a device to fail gracefully during abusive events and minimize or mitigate failure propagation. Also of interest to this symposium is multi-physics modeling, from gradual degradation pathways to catastrophic thermal runaway events, to guide the design of new energy storage technologies with inherently safer materials.


Topics will include:

  • Electrode/electrolyte interface including Li/liquid electrolyte, Li/solid electrolyte, and cathode/solid electrolyte
  • Liquid electrolytes or additives for safer and long-cycle-life energy storage
  • Solid state electrolytes including ceramics, glass, polymer, and new composites
  • Lithium anode architectures and surface engineering
  • Safety and degradation of electrode materials
  • Safety devices and mitigation of failure propagation
  • Cell design, modeling, diagnostics, and safety

Invited Speakers:

  • Khalil Amine (Argonne National Laboratory, USA)
  • Ratnakumar Bugga (Jet Propulsion Laboratory, USA)
  • Yet-Ming Chiang (Massachusetts Institute of Technology, USA)
  • Robert Hamers (University of Wisconsin–Madison, USA)
  • Andreas Hintennach (Daimler AG, Germany)
  • Ankur Jain (The University of Texas at Arlington, USA)
  • Judith Jeevarajan (Underwriter Laboratories, USA)
  • Herman Lemmens (ThermoFisher Scientific, Netherlands)
  • Jun Liu (Pacific Northwest National Laboratory, USA)
  • Yuhao Lu (Amperex Technology Limited, China)
  • Arumugam Manthiram (The University of Texas at Austin, USA)
  • Amy Marschilok (Stony Brook University, USA)
  • Yue Qi (Michigan State University, USA)
  • Vanessa Wood (ETH Zürich, Switzerland)
  • Kang Xu (U.S. Army Research Laboratory, USA)
  • Yong Yang (City University of Hong Kong, China)

Symposium Organizers

Yuliya Preger
Sandia National Laboratories
Energy Storage Technology and Systems
USA
(505) 218-3742, ypreger@sandia.gov

Dongping Lu
Pacific Northwest National Laboratory
USA
509-372-6438, Dongping.Lu@pnnl.gov

Sagar Mitra
Indian Institute of Technology Bombay
Department of Energy Science and Engineering
India
91-22-2576-7849, sagar.mitra@iitb.ac.in

Donghai Wang
The Pennsylvania State University
USA
814-863-1287, dwang@engr.psu.edu