Roel Van de Krol, Helmholtz-Zentrum Berlin
Todd Deutsch, NREL
Matthew Mayer, Ecole Polytechnique Federale de Lausanne (EPFL)
Avner Rothschild, Technion Israel Institute of Technology
ACS Energy Letters | ACS Publications, Helmholtz-Zentrum Berlin für Materialien und Energie, Journal of Physics D: Applied Physics | IOP Publishing, Nature Energy | Macmillan Publishers Ltd
EC4.1: Demonstration Devices I
Roel Van de Krol
Monday AM, November 28, 2016
Sheraton, 2nd Floor, Independence East
9:30 AM - *EC4.1.01
Mesoscopic Photosystems for the Generation of Fuels from Sunlight.
Michael Graetzel 1
1 Ecole Polytechnique Fédérale de Lausanne Lausanne SwitzerlandShow Abstract
Mesoscopic photovoltaics have emerged as credible contenders to conventional p-n junction photovoltaics. Separating light absorption from charge carrier transport, dye sensitized solar cells (DSCs) were the first to use three-dimensional nanocrystalline junctions for solar electricity production, reaching currently a power conversion efficiency (PCE) of over 14% in standard air mass 1.5 sunlight. Meanwhile, large-scale production and commercial sales have been launched on the multi-megawatt scale. Recently, the DSC has engendered the meteoric rise of perovskite solar cells (PSCs) which have presently attained a power conversion efficiency (PCE) over 22 %, certified exceeding the PCE of polycrystalline silicon solar cells. Methylammonium lead iodide (CH3NH3PbI3) and related pigments have emerged as powerful light harvesters. Carrier diffusion lengths in the 100 nm to micron range have been measured for solution-processed perovskites. These photovoltaics shows intense electroluminesence matching the external quantum efficiency of silicon solar cells. As a consequence, very high Voc values close to 1.25 V for a 1.55 eV band gap material have been obtained under standard reporting conditions. These high Voc values render perovskite-based mesoscopic photosystem very attractive for use in tandem cells and for generation of fuels from sunlight mimicking natural photosynthesis.
10:00 AM - EC4.1.02
Large Scale Cuprous Oxide Photocathode toward PEC-PV Tandem Demonstrator for Solar-Driven Water Splitting—From Design to Characterization
Min-Kyu Son 1 , Matthew Mayer 1 , Jingshan Luo 1 , Marcel Schreier 1 , Linfeng Pan 1 , Michael Graetzel 1
1 Ecole Polytechnique Federale de Lausanne Lausanne SwitzerlandShow Abstract
Photoelectrochemical (PEC) and photovoltaic (PV) two-absorber tandem configurations are a promising concept for solar-driven water splitting into hydrogen and oxygen, enabling the generation of sufficient driving force for standalone water splitting while efficiently utilizing the sunlight spectrum. It generally consists of three parts: photocathode generating hydrogen, counter electrode generating oxygen (or vice versa), and PV component providing a bias voltage. Most recent works on these components of PEC-PV configuration have only been carried out on the small scale below 1 cm2. Furthermore, there are no reports on the performance and characterization of large scale PEC electrode, until now. Research on the large scale development of PEC electrodes is important toward eventual implementation of solar-driven water splitting in the future.
Therefore, in this study, we focus on the large scale cuprous oxide (Cu2O) photocathode with an active area of 50 cm2 for PEC-PV tandem demonstrator because it has attracted much attention as a promising photocathode material due to proper band position for hydrogen generation, abundance, non-toxicity and scalability. Although our planar Cu2O photocathode with AZO/TiO2 overlayers and RuOx hydrogen evolution reaction catalyst shows photocurrent density reaching up to almost 5 mA cm-2 at 0V vs RHE in pH 5 electrolyte in the small scale, the performance was notably decreased with poor fill factor when scaled up to 50 cm2 due to increased charge resistance. To improve the performance on the large scale, we design several types of large scale Cu2O photocathode with metal grids, as well as one with Cu2O nanowire structure. In addition, we study the large scale counter electrode with oxygen evolution reaction catalysts, which is also important in the PEC-PV tandem demonstrator for solar driven water splitting.
10:15 AM - EC4.1.03
Unassisted Photoelectrochemical Water Splitting Exceeding 7% Solar-to-Hydrogen Conversion Efficiency Using Photon Recycling
Xinjian Shi 1 2 , Hokyeong Jeong 3 , Seungjae Oh 3 , Ming Ma 4 , Kan Zhang 1 , Jeong Kwon 4 , In Taek Choi 5 , Il Yong Choi 3 , Hwan Kyu Kim 5 , Jong Kyu Kim 3 , Jong Hyeok Park 1
1 Department of Chemical and Biomolecular Engineering Yonsei University Seoul Korea (the Republic of), 2 Department of Mechanical Engineering Stanford University Stanford United States, 3 Department of Materials Science and Engineering Pohang University of Science and Technology Pohang Korea (the Republic of), 4 Sungkyunkwan University Suwon Korea (the Republic of), 5 Department of Advanced Materials Chemistry Korea University Sejong Korea (the Republic of)Show Abstract
Various tandem cell configurations have been reported for highly efficient and spontaneous hydrogen production from photoelectrochemical (PEC) solar water splitting. However, there is a contradiction between two main requirements of a front photoelectrode in a tandem cell configuration, namely, high transparency and high photocurrent density. Here we demonstrate a simple yet highly effective method to overcome this contradiction by incorporating a hybrid conductive distributed Bragg reflector on the back side of the transparent conducting substrate for the front PEC electrode, which functions as both an optical filter as well as a conductive counter-electrode of the rear dye-sensitized solar cell. The hybrid conductive distributed Bragg reflectors were designed to be transparent to the long-wavelength part of the incident solar spectrum (λ>500 nm) for the rear solar cell, while reflecting the short-wavelength photons (λ<500 nm) which can then be absorbed by the front PEC electrode for enhanced photocurrent generation. The tandem device with the hybrid conductive distributed Bragg reflector shows unassisted hydrogen evolution with a solar-to-hydrogen conversion efficiency of 7.1%, which is the best performance reported to date for a PEC/solar cell tandem device.
10:30 AM - EC4.1.04
Solar-to-Hydrogen Efficiency—Shining Light on Photoelectrochemical Device Performance
James Young 1 , Henning Doscher 1 , John Geisz 1 , John Turner 1 , Todd Deutsch 1
1 National Renewable Energy Laboratory Lakewood United StatesShow Abstract
Direct photoelectrochemical (PEC) hydrogen production aims to provide a clean and cost-effective solar fuel. Solar-to-hydrogen (STH) conversion efficiency is central to evaluating and comparing research results, and it largely establishes the prospect for successfully introducing commercial solar water-splitting systems. Present measurement practices do not follow well-defined standards, and common methods potentially impact research results and their implications. We demonstrate underestimated influence factors and experimental strategies for improved accuracy.
Our focus is tandem devices that have the prospect for greater STH efficiency, but increased complexity that requires more careful consideration of characterization practices. We perform measurements on an advanced version of the classical GaInP/GaAs design while considering (i) calibration and adjustment of the illumination light-source; (ii) confirmation of the consistency of results by incident photon-to-current efficiency (IPCE), and (iii) definition and confinement of the active area of the device.
We initially measured 21.8% STH efficiency using a tungsten white-light source, a calibrated GaInP photovoltaic reference cell, and epoxy-encased photocathodes. In contrast, integrating experimental IPCE over the AM 1.5G solar irradiance showed that less than 10% STH conversion appeared conceivable. We then performed a set of on-sun measurements that gave 16.1% STH, before eliminating indirect light coupled to the sample by using a collimating tube and 13.8% STH efficiency thereafter. However, the value still vastly exceeded the current density expected according to the quantum efficiency measured via IPCE. Finally, suspecting that the illuminated area is poorly defined by epoxy, we use a compression cell for an epoxy-free area definition, resulting in 9.3% STH efficiency – a number also compatible with our IPCE results.
We propose applying the following standards for future PEC performance reporting: (i) traceable disclosure of the illumination-source configuration (lamp, filters, optics, PEC configuration) and/or its measured spectral distribution; (ii) thorough device-area definition (including confinement of the illumination area and avoidance of indirect light paths); (iii) complementary IPCE confirmation of the solar-generation potential; and (iv) proper consideration of faradaic efficiency.
 H. Döscher, J. L. Young, J. F. Geisz, J. A. Turner, and T. G. Deutsch, “Solar to hydrogen efficiency: Shining light on phoelectrochemical device performance,” Energy Environ. Sci. 2015.
 H. Döscher, J. F. Geisz, T. G. Deutsch, and J. A. Turner, “Sunlight absorption in water – efficiency and design implications for photoelectrochemical devices,” Energy Environ. Sci. 2014.
 O. Khaselev and J. A. Turner, “A Monolithic Photovoltaic-Photoelectrochemical Device for Hydrogen Production via Water Splitting,” Science. 1998.
10:45 AM - EC4.1.05
Simultaneous Conversion and Storage of Solar Energy—Solar Redox Flow Battery
Joao Azevedo 1 , Kristina Wedege 2 , Anders Bentien 2 , Adelio Mendes 1
1 Laboratory for Process Engineering, Environment, Biotechnology and Energy Porto Portugal, 2 Department of Engineering Aarhus University Aarhus DenmarkShow Abstract
With the escalation of energy consumption, consequent carbon dioxide footprint and fossil fuel reserves depletion, the worldwide nations are increasingly aware of the necessity to take advantage of renewable energy sources. Also, in the last years, new energy policies are being developed and some were already enforced aiming at more energy-sustainable behavior. This means that over the next decade, the energy supply of buildings will be increasingly dominated by renewable sources perfectly integrated in buildings, aiming at energy generation where it is consumed.
Among the different renewable energy sources, solar energy can easily provide enough power for all of human needs if it can be efficiently harvested. However, its intermittent nature and its increasing contribution to electricity generation are craving for efficient storage technologies. There are several battery technologies that can be used for electric power storage but redox flow batteries (RFBs) are a very at-tractive technology for their low cost, high charge-discharge energy efficiency, fast response time, modularity and flexibility.
In this work, it is proposed an innovative storage system, based on the combination of RFB with photoelectrochemical (PEC) cells – Solar-RFB. Two different systems were explored. In the first system, the possibility of storing solar energy in a simple way using a vanadium redox flow battery and a CdS photoanode is demonstrated; unbiased charged of a solar redox flow battery (RFB) (CdS(s)|V3+, VO2+||V3+, V2+|Carbon Felt(s), E0 = 0.6 VNHE) was achieved. Different strategies to improve the low CdS stability were explored and CdSe protective overlayer had a twofold increase with photocurrents up to 1.4 mA cm–2. A tandem system battery using a dye-sensitized solar cell (DSC) was also studied to provide the necessary photovoltage to charge a standard all vanadium redox flow (DSC/CdS(s)|VO2+, VO2+||V3+, V2+|Carbon Felt(s), E0 = 1.2 VNHE); in this configuration, the observed photocurrent was 1 mA cm–2.
For practical applications, non-acidic electrolytes combined with stable and efficient semiconductors are of critical importance. A new RFB was developed based on anthraquinone-2,7-disulphonate and ferrocyanide redox pairs. This new battery displays high energy and coulombic efficiencies. It is shown the possibility of direct solar charging ferrocyanide/anthraquinone redox pairs in an alkaline RFB with a hematite photoanode, which is low cost and stable. Novel surface treatments of the hematite photoanodes showed improved performance. The use of organic and inorganic redox pairs in alkaline and acidic aqueous media offers a wide range of possibilities to form synergetic combinations with different semiconductors for direct solar charging RFBs.
1. D. Abbott, Proc. IEEE. 98 (2010) 42–66.
2. A.Z. Weber et al., 41 (2011) 1137–1164.
3. J. Azevedo et al., Nano Energy. 22 (2016) 396–405.
4. K. Wedege et al., Angew. Chem. (2016) 1–9.
EC4.2: Novel Light Absorbers
Monday AM, November 28, 2016
Sheraton, 2nd Floor, Independence East
11:30 AM - *EC4.2.01
Materials Challenges for Sustainable Photoelectrochemical Solar to Fuel Conversion
Joel Ager 1 2
1 Joint Center for Artificial Photosynthesis Lawrence Berkeley National Lab Berkeley United States, 2 Material Science and Engineering University of California Berkeley Berkeley United StatesShow Abstract
Solar to fuel conversion could provide an alternative to mankind’s currently unsustainable use of fossil fuels. Solar fuel generation by photoelectrochemical (PEC) methods is a potentially promising approach to address this fundamental challenge.
The key materials science challenges that need to be addressed to enable practical and scalable solar fuel devices will be outlined. The analysis will focus on a fundamental requirement of any sustainable solar conversion technology, which is to generate more energy over its useful lifetime than was required to manufacture and maintain it. In this analysis, both solar to fuel conversion and device lifetime are crucial. For example, in the case of PEC-driven solar water splitting, using very general assumptions regarding the primary energy cost of manufacturing, operational lifetimes on the order of years are required for a positive energy payback .
The reported laboratory solar to hydrogen (STH) conversion efficiencies of PEC water splitting devices range from <1% to over 20% [2,3]. However, there are very few reports of operational stability beyond a few days. While there has been little mechanistic work on the precise failure mechanisms, corrosion of the photoactive material, particularly for oxygen-evolving photoanodes, is frequently observed. The use of carrier-selective protection layers is one strategy to mitigate this effect [4,5], and the prospects of achieving long-term operation with this approach will be discussed.
There has been substantial recent progress in solar driven PEC CO2 reduction, with some reports of energy conversion efficiencies exceeding 5% . Similar to the case of PEC water splitting, an approach with long-term operational stability has not yet been demonstrated. The devices operate in near-neutral pH as opposed to the extreme acid or basic conditions typically used in PEC water splitting, which relaxes some materials constraints. However, new materials challenges arise. For example, the large overpotentials required on the cathode (or photocathode) require reductively stable materials. Also, many CO2 reduction catalysts (e.g. Cu) deactivate on time scales much shorter than would be required for a positive energy return. Substantial improvements in operational lifetime are required for PEC-based CO2 reduction to be sustainable.
This material is based upon work performed by the Joint Center for Artificial Photosynthesis, supported through the Office of Science of the U.S. Department of Energy. Support from the Singapore Berkeley Research Institute for Sustainable Energy (SinBeRISE) is also acknowledged.
(1) Sathre et al., Energy Environ. Sci. 2014, 7, 3264–3278; Energy Environ. Sci. 2016, 9, 803.
(2) Ager et al. Energy Environ. Sci. 2015, 8 (10), 2811–2824.
(3) Rongé et al. Chem. Soc. Rev. 2014, 43, 7963–7981.
(4) Chen et al. J. Am. Chem. Soc. 2015, 137, 9595.
(5) Hu et al. J. Phys. Chem. C 2015, 119, 24201.
(6) Schreier et al. Nat. Commun. 2015, 6, 7326.
12:00 PM - EC4.2.02
Solar Fuels Photoanodes Prepared by Inkjet Printing of Copper Vanadates
Paul Newhouse 1 , David Boyd 3 , Aniketa Shinde 1 , Dan Guevarra 1 , Lan Zhou 1 , Edwin Soedarmadji 1 , Guo Li 2 , Jeffrey Neaton 2 , John Gregoire 1
1 Joint Center for Artificial Photosynthesis Caltech Pasadena United States, 3 Division of Mathematics and Astronomy California Institute of Technology Pasadena United States, 2 Joint Center for Artificial Photosynthesis and Molecular Foundry, Lawrence Berkeley National Laboratory Berkeley United StatesShow Abstract
Widespread deployment of solar fuel generators requires the development of efficient and scalable functional materials, especially for photoelectrocatalysis of the oxygen evolution reaction. Metal oxides comprise the most promising class of photoanode materials, but no known material meets the demanding photoelectrochemical requirements. Copper vanadates have recently been identified as a promising class of photoanode materials with several phases exhibiting an indirect band gap near 2 eV and stable photoelectrocatalysis of the oxygen evolution reaction in a pH 9.2 electrolyte. By employing combinatorial inkjet printing of metal precursors and applying both calcination and rapid thermal processing, we characterize the phase behaviour of the entire CuO-V2O5 composition space for different thermal treatments via automated analysis of approximately 100 000 Raman spectra acquired using a novel Raman imaging technique. These results enable the establishment of structure-property relationships for optical absorption and photoelectrochemical properties, revealing that highly active photoelectrocatalysts containing alpha-Cu2V2O7 or alpha-CuV2O6 can be prepared using scalable solution processing techniques. An additional discovery results from the formation of an off-stoichiometric beta-Cu2V2O7 material that exhibits high photoelectroactivity in the presence of a ferri/ferrocyanide redox couple with excellent stability in a pH 13 electrolyte, demonstrating that copper vanadates may be viable photoanodes in strong alkaline electrolytes.
12:15 PM - EC4.2.03
The Effect of Doping on Photoelectrochemical H
2 Evolution on
James Park 1 , Jason Krizan 1 , Robert Cava 1 , Andrew Bocarsly 1
1 Chemistry Princeton University Princeton United StatesShow Abstract
We have shown that p-type CuRhO2 (Eg = 1.9 eV) is an excellent photocathode for H2 evolution.1 With a band structure that straddles both water reduction and oxidation, CuRhO2 enables water reduction at an underpotential of ~0.2 V and possesses a strong resistance to being reduced to metallic copper in air-saturated basic electrolyte. Because of its promising intrinsic properties, improving the photoactivity of CuRhO2 by hole-doping is of significant interest. A series of doped CuRhO2 samples were synthesized by reacting various ratios of CuO and Rh at 900 °C for 36 hours under flowing mixed gas atmosphere (O2:Ar = 1:99) with various amounts of Mg(OH)2 or RuO2, after which time their identities were confirmed by powder X-ray diffraction (XRD). The dopant was probed using X-ray photoelectron spectroscopy (XPS). Hall effect mobilities and four probe resistivity measurements were used to determine carrier concentrations, which were shown to be correlated with photoresponses. Depending on the dopant identity, the photocatalytic activity of CuRhO2 is found to either increase or decrease. This finding provides insight into the mechanism of water splitting on this and related delafossite materials.
1. Gu, J.; Yan, Y.; Krizan, J. W.; Gibson, Q. D.; Detweiler, Z. M.; Cava, R. J.; Bocarsly, A. B. J. Am. Chem. Soc. 2014, 136, 830.
12:30 PM - EC4.2.04
Optoelectronic Properties and Photo-Excited Carrier Dynamics of Copper Vanadate (CVO) Thin Films
Chang-Ming Jiang 1 2 , Jason Cooper 1 2 , Ian Sharp 1 2
1 Chemical Sciences Division Lawrence Berkeley Laboratory Berkeley United States, 2 Joint Center for Artificial Photosynthesis Berkeley United StatesShow Abstract
Thin films of copper vanadate (CVO), a new candidate as an n-type semiconductor photoanode for driving the oxygen evolution reaction (OER), were prepared via reactive co-sputtering in an oxygen environment. A series of different CVO phases were synthesized by varying the Cu:V stoichiometric ratio during the sputtering process. Among these phases, Cu3V2O8 (McBirneyite) and Cu11V6O26 (Fingerite) possess promising characteristics for photoelectrochemical applications, including (photo)chemical stability, visible light absorption, and low dark current. Under PEC testing conditions, both Cu3V2O8 and Cu11V6O26 generated anodic photocurrent responses when illuminated with simulated solar radiation and remained stable for at least 20 h of continuous illuminated operation at 1.23 V vs. RHE in pH 9.2 buffer solution. However, obtained photocurrent densities were significantly lower than anticipated based on their bandgaps, even in the presence of sacrificial hole acceptor. In order to understand PEC performance limitations, measurements of basic optical and electrical properties, together with photocarrier dynamics, were performed. Variable angle spectroscopic ellipsometry was used to establish optical constants and determine that both phases possess indirect bandgaps, making them relatively weak absorbers across the visible spectral range. The relaxation dynamics of excited-state carriers in CVO films were studied via time-resolved spectroscopy. The transient absorption signals of free carriers were characterized by dominant sub-picosecond relaxation kinetics associated with rapid carrier trapping processes. Consistent with this finding, PEC response measurements as a function of film thickness revealed an upper bound for the minority carrier diffusion length of ~50 nm. As a result of mismatch between optical absorption depth and minority carrier diffusion length, low charge extraction efficiencies at the semiconductor/electrolyte interface are obtained. However, ongoing work is dedicated to determining the origin of rapid photocarrier trapping processes; elimination of this relaxation channel could greatly enhanced PEC performance characteristics. In addition, differences between the native catalytic activities of Cu3V2O8 and Cu11V6O26 were observed. Electrodeposition of cobalt borate (CoBi), a known OER catalyst, onto CVO photoelectrodes yields favorable shifts of photocurrent onset potentials and increases in photocurrent densities, suggesting that the semiconductor interface is defect tolerant.
EC4.3: Hybrid Systems for Solar Fuels
Monday PM, November 28, 2016
Sheraton, 2nd Floor, Independence East
2:30 PM - *EC4.3.01
Artificial Photosynthesis—Progress, Science Outlook and Technology Prospects
Harry Atwater 1
1 California Institute of Technology Pasadena United StatesShow Abstract
The design of highly efficient, nonbiological energy conversion “machines” that generate fuels directly from sunlight, water, and carbon dioxide is both a formidable challenge and an opportunity that, if realized, could have a revolutionary impact on our energy system and efforts to address climate change. In the past five years, considerable progress has been made in scientific discovery of key materials and mechanisms needed to realize artificial solar fuels generators for hydrogen generation by water splitting, and advances in materials, modeling and design have yielded a conceptual paradigm for a solar fuels generator and working prototypes. While we still lack sufficient knowledge to design solar-fuel generation systems with the ultimate efficiency, scalability, and sustainability to be economically viable, considerable advances have been made, particularly for water-splitting solar fuels devices. Recent progress from JCAP, and practical limits to water splitting devices will be discussed. Understanding of CO2 reduction catalysis is an outstanding scientific challenge for artificial photosynthesis structures for generation of fuels and chemicals by reduction of CO2. I will discuss recent advances by JCAP in understanding approaches to achieving selectivity and activity in CO2 reduction electrocatalysis and photocatalysis.
3:00 PM - EC4.3.02
Water Splitting-Biosynthetic Systems with CO2 Reduction Efficiencies Exceeding Photosynthesis
Chong Liu 1 , Brendan Colon 2 , Marika Ziesack 2 , Pamela Silver 2 , Daniel Nocera 1
1 Harvard University Cambridge United States, 2 Harvard Medical School Boston United StatesShow Abstract
Artificial photosynthetic systems can store solar energy and chemically reduce CO2. We developed a hybrid water splitting-biosynthetic system based on a biocompatible earth-abundant inorganic catalyst system to split water into H2 and O2 at low driving voltages. When grown in contact with these catalysts, Ralstonia eutropha consumed the produced H2 to synthesize biomass and fuels or chemical products from low CO2 concentration in the presence of O2. This scalable system has a CO2-reduction energy efficiency of ~50% when producing bacterial biomass and liquid fusel alcohols, scrubbing 180 grams of CO2 per 1 kWh of electricity. Coupling this hybrid device to existing photovoltaic systems would yield a CO2 reduction energy efficiency of ~10%, exceeding natural photosynthetic systems.
3:15 PM - EC4.3.03
Hybrid Photo-Electrochemical and Photo-Voltaic Cells (HPEV cells)
Gideon Segev 1 , Jeffery Beeman 1 , Karl Walckzak 1 , Ian Sharp 1
1 Joint Center for Artificial Photosynthesis Lawrence Berkeley National Laboratory Berkeley United StatesShow Abstract
The majority of photoelectrochemical (PEC) water splitting cells cannot drive the overall water splitting reactions without the assistance of an external power source. In order to provide added power, the cells are usually connected to photovoltaic (PV) devices in a tandem arrangement or to external power sources. These two methods suffer from severe disadvantages. In the tandem arrangement, the PEC cell is connected in series to the PV cell and the overall current is typically limited by the saturation current of the PEC component. Thus, the operating point of the PV cell is often far from optimal and the overall system efficiency tends to be low. Alternatively, when PV cells are connected to the PEC cells through a DC-DC converter, the operating point of each sub-system can be chosen independently. However, this comes at the cost of increased losses and additional balance of system costs associated with the DC/DC conversion. To overcome the limitations imposed by these two traditional configurations, we propose a multi-terminal hybrid PV and PEC system (HPEV). As for the case of tandem arrangements, the PEC cell is optically connected in series with the PV cell. However, a second back contact is used to extract the PV cell surplus current and allow parallel production of both electrical power and chemical fuel. This multi-terminal approach allows each of the electrical and chemical components to operate at nearly independent electrical operating points, thereby increasing the overall solar energy conversion efficiency of the system. Furthermore, the amount of fuel or electricity produced can be chosen in real-time according to demand. Devices consisting of three-terminal silicon photovoltaic cells coupled to titanium dioxide water splitting layers are simulated and fabricated. The cells are shown to produce electricity with little reduction in the water splitting current, surpass the current mismatch limits, and increase the overall system efficiency.
3:30 PM - EC4.3.04
Hybrid Organic-Inorganic Photoelectrochemical Systems—A New Class of Devices for the Sustainable Conversion of Solar Energy to Fuel
Francesco Fumagalli 1 , Sebastiano Bellani 1 , Hansel Comas Rojas 1 , Marcel Schreier 2 , Alessandro Mezzetti 1 , Silvia Leonardi 1 , Laura Meda 3 , Guglielmo Lanzani 1 , Michael Graetzel 2 , Matthew Mayer 2 , Maria Rosa Antognazza 1 , Fabio Di Fonzo 1
1 Istituto Italiano di Tecnologia Milano Italy, 2 EPFL Lausanne Switzerland, 3 Istituto ENI Donegani Eni S.p.A. Novara ItalyShow Abstract
The direct conversion of solar energy into fuels, H2 in particular, is still a challenge. Recently, organic and hybrid organic-inorganic photoelectrochemical systems emerged as an alternative to the usual transition metal oxides or more costly III-V semiconductors. Here we present different suitable architectures for hybrid organic-inorganic photoelectrochemical devices for the conversion of solar energy to H2. Starting from a prototypical P3HT:PCBM blend as photoactive element, we focused our attention on different interfacial layers and their influence on the photocathode performances. The photoelectrocatalityic activity and long-term stability of a simple, catalysed, bulk heterojunction is proven and the effect on hydrogen generation performances of properly engineered selective contacts is investigated. Introduction of an electron selective layer is found to increase the photocurrent response, while a hole blocking layer shifts the onset potential towards positive voltages allowing operation in a electrical region compatible with a tandem photoanode and/or a PV cell. The relevance of our findings can be summarized in few key points: (i) high performances with a maximum photocurrent of 8 mA/cm2 at 0 V vs RHE and 50% IPCE; (ii) 100% faradaic efficiency along the whole electrode’s lifetime; (iii) excellent energetics with onset potential as high as +0.7 V vs RHE; (iv) promising operational activity of several tens of hours and (vi) by-design compatibility for implementation in a tandem architecture [Fumagalli et al. JMCA (2016)]. Moreover, we investigated the influence of photocathode nanostructuration, developing a 3D multi-layered system based on a nanostructured hole selective scaffold, in host/guest architecture. This allowed us to demonstrate efficient devices with an active layer thickness as low as 20 nm, thanks to the orthogonalization of light absorption and carrier collection. Finally, we demonstrate the realization of an efficient and cost-competitive “all-solution processed” photocathode with and without a non-precious catalyst. Such a system exhibits 4mA/cm2 at 0 V vs RHE, an onset potential of 0.4 V at RHE and stability of over 1hr. Collectively, this set of features establish the hybrid architecture we developed well ahead of existing reports on organic photoelectrochemical systems and suggest the potential of the hybrid organic-inorganic photoelectrochemical (HOPEC) concept as real contender to the traditional inorganic counterpart. From the knowledge learnt, we anticipate that stable operation at photocurrents close to the maximum achievable with OPV, beyond 10 mA/cm2 at positive bias, are achievable. This work opens up the way to the exploration of the rich library of organic semiconductors developed for OPVs in photoelectrochemistry and to the realization of a new generation of large area, solution processed tandem water splitting devices for renewable and low cost direct conversion of solar energy into hydrogen.
3:45 PM - EC4.3.05
Molecular and Heterogeneous Catalysis for the Sunlight-Driven Reduction of CO2 to Fuels
Marcel Schreier 1 , Michael Graetzel 1
1 Ecole Polytechnique Fédérale de Lausanne Lausanne SwitzerlandShow Abstract
CO2-derived fuels present an attractive way towards a sustainable energy system. Mimicking natural photosynthesis by synthesizing carbon-based energy carriers using power from the sun allows for closing the anthropogenic carbon cycle and therefore represents an attractive way to store solar energy, a challenge that has not yet found a satisfying solution.
The widespread use of solar fuels will require large surfaces of absorbers and catalysts, which should therefore be fabricated from abundant materials. In this context, we show the application of low-cost and scalable Cu2O photocathodes in combination with molecular rhenium catalysts, both in solution1 and covalently bound to a modified photoelectrode surface.2 From both approaches, we observe substantial photocurrents and photovoltages, demonstrating protected Cu2O photocathodes as viable candidates for solar-driven CO2 reduction processes. Investigating the charge transfer behaviour on these systems allows us to observe unexpected effects, which provide insight into the mechanism of Re-based CO2 reduction catalysts.
Moving from organic solvents into aqueous systems, we demonstrate the unassisted and sustainable splitting of CO2 into CO and O2 using CH3NH3PbI3-based photovoltaics as light absorbers, reaching an efficiency of 6.5 %.3 Building up on this work, we show how ALD modification of CuO nanowires can lead to a bifunctional and low-cost catalyst both for CO evolution from CO2 and for the oxygen evolution reaction. By ALD modification, the wide product distribution of Cu-based catalysts could be impressively narrowed to yield predominantly CO. Investigations into the microkinetics on these electrodes indicate that the observed change is due to the suppression of H2 evolution, while the rate of CO production remained similar. Together with the use of a bipolar membrane, allowing for separating product gases while maintaining a sustained pH gradient, we used these electrodes to demonstrate long-term solar CO production at an efficiency of 14.2 %, driven by a single 3-junction GaInP2/GaAs/Ge photovoltaic.4
Another way to modify the selectivity and activity of CO2 reduction electrodes has been identified in the use of co-catalysts. By investigating structure-activity relationships between imidazolium co-catalysts and CO2 reduction activity on silver cathodes, we discovered that the imidazolium C4 and C5 protons play an important role, extending the state-of-the-art understanding of the mechanism of this process.5 These results will also be presented.
(1) Schreier, M. et al. Energy Env. Sci 2015, 8 (3), 855.
(2) Schreier, M. et al. J. Am. Chem. Soc. 2016, 138 (6), 1938.
(3) Schreier, M. et al. Nat. Commun. 2015, 6, 7326.
(4) Schreier, M. et al. in preparation
(5) (Lau, G. P. S.; Schreier, M.)‡ et al. J. Am. Chem. Soc. 2016.
‡ equal contribution
EC4.4: CO2 Electrocatalysis
Monday PM, November 28, 2016
Sheraton, 2nd Floor, Independence East
4:30 PM - *EC4.4.01
Carbon-Carbon Bond-Forming Catalysis for Scalable CO2 Utilization
Matt Kanan 1
1 Stanford University Stanford United StatesShow Abstract
Processes that convert CO2 into fuels and chemicals using reducing equivalents from renewable energy are essential for building an environmentally benign energy economy. In order to be implemented on a significant scale, these methods must be competitive with fossil fuel–based syntheses. To this end, the key chemical challenge is to convert CO2 into multi-carbon (C2+) products because these targets have higher value, greater energy density, and more applications than C1 compounds. Our strategy is to leverage existing solar energy conversion processes and develop light-independent CO2 conversions that make C–C bonds. This talk will highlight recent results in our development of heterogeneous CO2 reduction catalysts. I will describe “defect-rich” nanoparticles for electrochemical CO2 and CO reduction and carbonate-based catalysts for CO2 hydrogenation. These catalytic materials provide complementary routes from CO2 to high-value C2+ oxygenates. The fundamental materials chemistry will be discussed in the context of the challenges that must be addressed to develop scalable technologies.
5:00 PM - EC4.4.02
Selective and Efficient Reduction of CO2 Using Nanostructured Electrocatalysts
Wilson Smith 1 , Ming Ma 1
1 Delft University of Technology Delft NetherlandsShow Abstract
The electrochemical conversion of CO2 into carbon-based fuels is an attractive strategy for utilizing atmospheric CO2. For achieving this goal, the essential step is to develop a cheap, stable, and efficient catalyst with high selectivity for a desired product. Over the past few decades, several catalyst materials with the capability of reducing CO2 electrochemically in CO2 saturated-aqueous solutions have been identified. It has been demonstrated that polycrystalline Au is capable of reducing CO2 to CO with a high faradaic efficiency (FE) of ~ 87% at -0.74 versus the reversible hydrogen electrode (RHE). While Au is currently the most efficient electrocatalytic surface for CO2 reduction to CO, the low abundance and high cost of Au may prevent its large-scale applications. To find a cost-effective and stable catalyst with high selectivity and efficiency remains a challenge for achieving practical utilization of CO2 reduction to CO.
In this work, the selective electrocatalytic reduction of CO2 to CO on oxide-derived Ag electrocatalysts is presented. By a simple synthesis technique, the overall high faradaic efficiency for CO production on the oxide-derived Ag was shifted by >400 mV towards a lower overpotential compared to that of untreated Ag. Notably, the Ag resulting from Ag oxide is capable of electrochemically reducing CO2 to CO with approximately 80% catalytic selectivity at a moderate overpotential of 0.49 V vs. RHE, which is much higher than that (~4%) of untreated Ag at identical conditions. Electrokinetic studies show that the improved catalytic activity is ascribed to the enhanced stabilization of COOH* intermediate. Furthermore, a highly nanostructured Ag is likely able to create a high local pH near the catalyst surface, which may also facilitate the catalytic activity for the reduction of CO2 with suppressed H2 evolution.
In addition, the effect of Cu nanowire morphology on the selective electrocatalytic reduction of CO2 is presented. Cu nanowire arrays were prepared through a two-step synthesis of Cu(OH)2 and CuO nanowire arrays on Cu foil substrates and a subsequent electrochemical reduction of the CuO nanowire arrays to Cu nanowire arrays. By this simple synthesis method, Cu nanowire array electrodes with different length and density were able to be controllably synthesized. We show that the selectivity for hydrocarbons (ethylene, n-propanol, ethane and ethanol) on Cu nanowire array electrodes at a fixed potential can be tuned by systematically altering the Cu nanowire length and density. The nanowire morphology effect is linked to the increased local pH in the Cu nanowire arrays and a reaction scheme detailing the local pH induced formation of C2-products is also presented via a preferred CO dimerization pathway.
Overall, we show two disntict systems that offer selective and efficient electrochemical reduction of CO2 to CO.
5:15 PM - EC4.4.03
Light-Induced Cation Exchange as a Synthesis Route to Copper(I)-Based CO2 Reduction Photocatalysts
Jacek Stolarczyk 1 3 , Aurora Manzi 1 3 , Florian Ehrat 1 3 , Thomas Simon 1 3 , Clemens Sonnleitner 1 3 , Markus Doblinger 2 , Regina Wyrwich 2 , Omar Stern 4 , Jochen Feldmann 1 3
1 Photonics and Optoelectronics Group Ludwig-Maximilian University Munich Munich Germany, 3 Nanosystems Initiative Munich Munich Germany, 2 Dept. of Chemistry Ludwig-Maximilian University Munich Germany, 4 GE Global Research Munich GermanyShow Abstract
Copper (I) based catalysts, such as Cu2X (X=S,Se), are considered to be very promising materials for their light harvesting properties and possible applications in photocatalytic CO2 reduction . A common synthesis route for Cu2X via cation exchange from CdS nanocrystals requires Cu (I) precursors and restrictive conditions, such as organic solvents and neutral atmosphere.
We report a novel cation exchange method in which we harness the reducing potential of photoexcited electrons in the conduction band of CdX nanocrystals to fabricate Cu2X nanostructures from CdX using Cu2+ precursors. In contrast to other cation exchange methods, this photoinduced process can proceed in an aqueous environment and under aerobic conditions, yet preserves the shape and the crystallinity of the original crystals and enables complete conversion of CdX nanocrystals .
We demonstrate that the as-prepared Cu2S nanorods can be efficiently used for the reduction of CO2 to carbon monoxide and methane. At the same time the, the competing water reduction, known to be very efficient for CdS , is suppressed.
We also show the applicability of the light-induced approach to preparation of other shapes of Cu2X nanocrystals, e.g. quantum dots . The process opens new pathways for the preparation of new efficient photocatalysts from readily available nanostructured templates.
 S.N. Habisreutinger, L. Schmidt-Mende, J.K. Stolarczyk, Angew. Chem. Int. Ed. 2013, 52, 7372-7408.
 A. Manzi, T. Simon, C. Sonnleitner, M. Döblinger, R. Wyrwich, O. Stern, J.K. Stolarczyk, J. Feldmann, J. Am. Chem. Soc. 2015, 137, 14007–14010.
 T. Simon, N. Bouchonville, M.J. Berr, A. Vaneski, A. Adrovic, D. Volbers, R.Wyrwich, M. Döblinger, A.S. Susha, A.L. Rogach, F. Jäckel, J.K. Stolarczyk, J. Feldmann, Nature Mater. 2014, 13, 1013-1018.
 A. Manzi, F. Ehrat, et al. in preparation
5:30 PM - EC4.4.04
Cu Nanoparticle/Carbon Nanofiber Catalyst with Simple Fabrication Process for Electrochemical CO
2 Reduction to Hydrocarbons
Hiroshi Hashiba 1 , Masahiro Deguchi 1 , Satoshi Yotsuhashi 1 , Yuka Yamada 1
1 Panasonic Corporation Kyoto JapanShow Abstract
Electrochemical reduction of carbon dioxide (CO2) is one of the possible candidates to combat with the exhaustion of fossil fuels by creating useful hydrocarbons from renewable energy sources and wasted CO2. One of the recent research trends of CO2 reduction has been nanoparticle or nanostructured catalyst, especially combined with carbon support. However, there is a problem regarding the product selectivity of such catalysts, which tend to favor hydrogen (H2) production compared to that in planer form. Therefore, there need to reduce competing hydrogen production by developing a novel catalyst structure to deliver sufficient CO2 to the catalyst. Also, the simplicity for the fabrication process is important in terms of practical application of the nanoparticle catalysts.
Here, we report on copper-nanoparticles embedded in carbon nanofiber (Cu/CNF) as a catalyst designed to ensure both the catalytic property of Cu and the mass-transport of CO2 through the catalyst with simple fabrication procedure. Cu/CNF catalyst was fabricated with electrospinning method from the mixture of CuO nanoparticles (average diameter: 20 nm) and polyimide precursor, where the ratio of CuO nanoparticles in CNF was 1.5wt%. After the electrospinning process, the catalyst was calcinated in argon atmosphere at 800 °C. During the calcination, CuO was reduced to Cu and nanofiber was carbonized. 0.5 M potassium chloride (KCl) solution was used for the electrolyte of CO2 reduction.
First, we compared the result of Cu/CNF under constant potential at -1.7 V vs. Ag/AgCl with that in planer Cu electrode and CNF (without Cu nanoparticles) of the same geometric surface area. The operation currents of Cu/CNF and Cu plate were the same order, whereas that of CNF was one-magnitude lower. In addition, Cu/CNF catalysts exhibited similar product distribution as that in Cu plate. After an hour of experiment, Cu nanoparticles were still stabilized at the surface of CNF though slight aggregation was observed. This work will enlarge the possibility of Cu-based catalyst for the application to more practical CO2 reduction system such as PEM-like and/or gas diffusion reactors. In the presentation, we will discuss the mechanism for CO2 reduction associated with the unique characteristic of CNF for CO2 adsorption.
5:45 PM - EC4.4.05
2 Reduction Using Cu Nanofibers-Decorated Titania Nanotubes
Menna Hasan 1 , Ahmed Khalifa 1 , Nageh Allam 1
1 American University in Cairo New Cairo EgyptShow Abstract
Photoelectrochemical conversion of CO2 using semiconductor photocatalysts is an efficient method for generating hydrocarbon fuels using renewable energy. This can be a promising alternative for fossil fuels while reducing carbon dioxide emissions, a major contributor to the greenhouse effect and global warming. Carbon dioxide’s reduction potential is only 20 mV positive of water reduction, hence carbon dioxide reduction competes with hydrogen generation. An ideal catalyst should then have a high hydrogen overpotential, allowing a higher selectivity for the reduction of carbon dioxide. Here, we report the use of titania nanotubes decorated with copper nanofibers for the selective photocatalysis of carbon dioxide to hydrocarbon fuels. Copper nanofibers were fabricated using the electrospinning technique. The fibers were collected over titania nanotubes and then annealed in oxygen at 500 °C for 4 hours. After annealing, the polymer decomposed leaving a porous-clustered copper nano-structure. The Cu nanofibers-decorated titania nanotubes were prepared via a facile method that is applicable for large-scale industrial applications. The photocatalytic performance of the material was measured using a three electrode cell, where carbon dioxide gas was bubbled for 30 min until saturation in 1 M KHCO3 solution. Under illumination of the sample with a 500 W xenon light source; light intensity, 100 mW cm-2, the reduction peak showed a positive shift. This confirms the photo-enhanced CO2 reduction on Cu nanofibers-decorated titania nanotubes. The results of this study confirm that the fabrication of nanofibers as a photocatalyst via electrospinning is a promising approach to catalysis for solar driven applications.
Roel Van de Krol, Helmholtz-Zentrum Berlin
Todd Deutsch, NREL
Matthew Mayer, Ecole Polytechnique Federale de Lausanne (EPFL)
Avner Rothschild, Technion Israel Institute of Technology
ACS Energy Letters | ACS Publications, Helmholtz-Zentrum Berlin für Materialien und Energie, Journal of Physics D: Applied Physics | IOP Publishing, Nature Energy | Macmillan Publishers Ltd
EC4.5: Demonstration Devices II
Tuesday AM, November 29, 2016
Sheraton, 2nd Floor, Independence East
9:30 AM - *EC4.5.01
ARTIPHYCTION—Photo-Electrochemical m2-Scale Device for Low Temperature Hydrogen Production
Guido Saracco 1 2 , Simelys Hernandez 2 1 , Nunzio Russo 2
1 Istituto Italiano di Tecnologia Torino Italy, 2 Applied Science and Technology Politecnico di Torino Torino ItalyShow Abstract
Solar fuels have been considered as one of the most promising technological concepts due to their high potential use and environmental suitability. The development of devices able to photocatalytic split water into O2 and H2 is currently of primary interest. In such framework, in 2011, the EUropean FCH JU Initiative financed the ARTIPHYCTION project (contract nr. 303435) with the aim to build a water splitting prototype, able to maximise the fraction of the solar light spectrum that can be captured and converted into hydrogen (ca. 3 g/h H2), with a targeted solar to hydrogen (STH) conversion efficiency of 5%, a prospected system durability of 10.000 h lifetime, and without using expensive noble metals or materials and via assembling techniques amenable for mass production.
The final Artiphyction prototype (area of 1.6 m2) was designed, optimized, manufactured and tested in the last six months of the project. Key features of the ArtipHyction photo-electro-chemical (PEC) device will be pointed out in this talk as listed in following:
- Efficiency target partially (50% - 66%) achieved: The best results with a CoPi-catalysed Mo-doped BiVO4 photo-anode and a Co nanoparticles-based cathodic electro-catalyst in the Final Artiphyction prototype show a potential of 3% overall sunlight into hydrogen conversion efficiency. However, due to mass-transfer and kinetics limitations phenomena (bubbles formation and accumulation in the electrodes surface) the performance decrease up to about 2% conversion efficiency during long-term operation.
- Life testing fully achieved: The final prototype module constituted by 5 PEC-PV units has been tested for 1000h and a limited reduction of efficiency (less than 5%) has been observed when operating at a 2% STH efficiency. Indeed, a trade-off between STH efficiency and stable operation has been pointed out in order to maintain the stability with the prospective durability of 10,000 h.
- No use of noble metals achieved: Attention have been addressed mostly on the anode water-splitting side of the cell were noble metal catalysts are not present. The synthesis techniques (i.e. spin-coating, electrodeposition, spray coating) adopted for BiVO4 and Co-based anodic and cathodic catalysts are amenable for mass production.
- Modularity achieved to fit various production needs: Special attention was paid on manufacture a modular system. The final ARTIPHYCTION prototype is composed of 20 modules, each of them with 5 PEC-PV units that can be assembled to reach different total areas.
- 100 W (ca. 3 g/h H2 equivalent) partially achieved (66%): The system was proved to be able to operate at 3% of STH efficiency, but a strategic decision was taken in favour of the prototype performance stability, limiting the STH efficiency to 2%. Therefore, the maximum overall H2 production of the prototype is slightly higher than 1 g/h.
- The objective of scaling up the photo electro-chemical conversion to 1.6 m2 irradiated surface was fully achieved.
10:00 AM - EC4.5.02
Photoelectrochemical Water Splitting for Solar Hydrogen Production—An Industrial Vision
Patrick Ginet 1 , Francoise Barbier 2
1 Research and Development Air Liquide Tsukuba Japan, 2 Research and Development Air Liquide Jouy-en-Josas FranceShow Abstract
The hydrogen molecule has many important uses in industry and will play a key role as a clean, sustainable energy vector and effective means of storing energy. On Earth, hydrogen is mainly found in water and organic compounds such as hydrocarbons and carbohydrates. Currently, about 96% of the global annual production of hydrogen is obtained from fossil fuels, primarily by high temperature steam methane reforming. In this process, hydrogen is liberated with formation of CO2 emissions. In current industrial plants, about 10 kg of CO2 is released per kg of hydrogen produced. Developing new H2-production processes based on renewable feedstock and energies will be a key contribution to energy transition and abatement of CO2.
With its Blue Hydrogen commitment, Air Liquide is moving towards a gradual decarbonization of its hydrogen production dedicated to energy applications. The splitting of water achieved with solar energy and semiconductor materials is a route for generation of renewable hydrogen with less carbon footprint. Many pathways at different technology readiness levels exist for the absorption of photons and for the electrocatalytic water splitting. The simplest sun-to-hydrogen pathway is the combination of photovoltaic cells with an electrolyzer interfaced with power conditioning device. In another approach based on photoelectrochemical water splitting, the photon absorption by semiconductor material creates a pair of electron-hole but instead of collecting electron and using it in an external load, electrons and holes are directly transferred to aqueous electrolyte to respectively reduce/oxidize water to hydrogen/oxygen. This solar-to-hydrogen pathway has received great attention but many issues and challenges remain to have it efficient and cost competitive.
The aim of this paper is to present the industrial view of the different approaches of photoelectrochemical water splitting with semiconductors for H2 production, to discuss recent progress and global activity, and to provide a relative performance of the most important identified technologies. Recommendations in areas where research efforts should be continued will be proposed.
10:15 AM - EC4.5.03
Scalable Water Splitting Systems Approaching 15 % Solar-to-Hydrogen Efficiency Based on Silicon Technology and New Earth Abundant Catalysts
Jesper Jacobsson 1 , Erwin Reisner 1
1 University of Cambridge Cambridge United KingdomShow Abstract
NiMo and NiFe catalysts have been explored for the hydrogen and oxygen evolution reaction. By combining the two catalysts, full water splitting was demonstrated with a potential as low as 1.55 V-1.60V at 10 mA/cm2. The NiMo and NiFe catalysts were combined with silicon technology into devices for solar hydrogen production. Both spatially separated PV-electrolysers and integrated monolithic systems were constructed. A reasonably cheap, stable, scalable, monolithic, earth abundant system with a solar-to-hydrogen (STH) efficiency above 10 % was demonstrated. With further engineering and optimisation, STH-efficiencies as high as 15 % are within reach. We further analyse how the costs compare between the different device architectures and show that even if these systems today not can compete with the hydrogen cost from steam reforming of natural gas, they are competitive compared to what previously have been seen in the solar hydrogen community.
10:30 AM - *EC4.5.04
Towards a Photoelectrochemical Demonstrator Device for Water Splitting (PECDEMO)
Fatwa Abdi 1 , Ji-Wook Jang 1 , Yimeng Ma 1 , Roel Van de Krol 1
1 Helmholtz-Zentrum Berlin Berlin GermanyShow Abstract
In the efforts to strengthen Europe’s position in the field of solar fuels, the PECDEMO consortium aims at developing a hybrid photoelectrochemical-photovoltaic (PEC-PV) tandem device for solar water splitting. The project targets solar-to-hydrogen (STH) efficiency of 8-10%, large scale (≥ 50 cm2), and long-term stability (1000 hours). Despite the emergence of several devices with reported efficiency beyond 10%, they are limited to small-area electrodes (~1 cm2) and short-term stability. We focus on improving known high-performing metal oxide photoelectrodes (e.g., BiVO4, Cu2O, Fe2O3) deposited with scalable methods. These oxides are then combined with a solar cell using innovative photon management strategies and cell design to form a highly efficient PEC-PV tandem device.
In this talk, specifically, the progress in developing BiVO4 thin film photoelectrodes will be outlined. By combining doping strategies, hydrogenation treatments, and photon management, we obtained an AM1.5 photocurrent of ~5 mA/cm2 at 1.23 V vs RHE, which is one of the highest reported value for a non-nanostructured BiVO4. The role of hydrogenation was also investigated by means of time-resolved microwave and DC conductivity, and contrasted to typical donor doping (e.g., with W or Mo). This high-performing thin film photoelectrode was coupled with a silicon solar cell in a simple stacked tandem configuration to form a hybrid PEC-PV device with an STH efficiency of 6.3% (based on the lower heating value of hydrogen). Finally, we fabricated a large area (~50 cm2 active area) BiVO4 photoelectrode via spray pyrolysis, and found that the photocurrent is limited by the ohmic losses in the conducting substrate. The implications of this finding and strategies to overcome this limitation will be discussed. Selected results from the PECDEMO consortium on Cu2O and Fe2O3 photoelectrodes, as well as techno-economic analysis will also be presented.
EC4.6: Understanding Interfaces
Tuesday AM, November 29, 2016
Sheraton, 2nd Floor, Independence East
11:30 AM - EC4.6.01
Tuning the Charge Transportation in Photoelectrochemical Water Splitting Systems via Permanent Electrical Polarization
Yanhao Yu 1 , Weiguang Yang 1 2 , Hongxia Li 1 3 , Xudong Wang 1
1 Materials Science and Engineering University of Wisconsin-Madison Madison United States, 2 Department of Electronic Information Materials Shanghai University Shanghai China, 3 Department of Materials and Environmental Engineering Hangzhou Dianzi University Hangzhou ChinaShow Abstract
Hydrogen production from photoelectrochemical (PEC) water splitting is a promising pathway for converting solar energy to chemical fuels. To achieve efficient and durable solar to hydrogen conversion, PEC photoelectrodes desirably need the following features: effective and broad band light absorption, rapid charge separation, and superior stability. N-type semiconductor oxides (e.g., TiO2, Fe2O3, and BiVO4) are popular candidates for constructing robust photoanodes due to their excellent chemical stability. The main drawbacks of these oxides are the limited light absorption and poor charge separation efficiency due to their large band gap and high trapping density. There are two predominant strategies to enhance the separation of electron-hole pairs in photoanodes: reducing the crystal size to the scale of the hole diffusion length; and increasing the carrier conductivity by morphology and crystallography control. Nevertheless, both strategies are restricted by the limit of synthesis procedures.
Permanent electrical polarization induced by ionic displacement (e.g., ferroelectric and piezoelectric potential) has shown great promises in engineering the interfacial band structure and manipulating the charge transfer property of heterostructures. PEC water splitting is an electrochemical system driven by similar energy discontinuity at the electrode/electrolyte interface. One can expect positive (maybe significant) performance gain when ferroelectric or piezoelectric polarization is appropriately introduced to such a system. Here, we report two PEC photoanodes with ferroelectric- and piezoelectric-enhanced charge separation efficiency on the basis of a TiO2/barium titanate (BTO) core/shell nanowire (NW) array and a Ni(OH)2 decorated ZnO photoanode systems, respectively. For TiO2/BTO electrode, the 5 nm BTO-coated TiO2 NWs achieved 67% photocurrent density enhancement compared to pristine TiO2 NWs. By numerically calculating the potential distribution across the TiO2/BTO/electrolyte heterojunctions and systematically investigating the light absorption, charge injection and separation properties of TiO2 and TiO2/BTO NWs, the PEC performance gain was proved to be a result of the increased charge separation efficiency induced by the ferroelectric polarization of the BTO shell. Similarly, for ZnO/Ni(OH)2 system, appreciably improved photocurrent density of sulfite and hydroxyl oxidation reactions were obtained by physically deflecting the photoanode. Both theoretical and experimental results suggested that the performance enhancement was a result of the piezoelectric polarization-endowed enlargement of the built-in electric field at the ZnO/Ni(OH)2 interface, which could drive additional amount of photoexcited charges from ZnO toward the interface for water oxidation. These studies evidence that the permanent electrical polarizations hold great promises in improving the performance of PEC systems in addition to chemistry and structure optimization.
11:45 AM - EC4.6.02
Strategies for Improving Charge Separation and Transfer in Semiconductor Photocatalysts for Efficient Solar Fuels Synthesis
Savio Moniz 1
1 University College London London United KingdomShow Abstract
Dr Savio Moniz,* Dr Junwang Tang
Solar Energy & Advanced Materials Group, Department of Chemical Engineering, University College London, UK
The most important factors dominating the efficiency of solar hydrogen synthesis over semiconductor photocatalysts include (1) light absorption, (2) charge separation and transport, and (3) surface chemical reactions (charge utilization). Furthermore, no single photocatalyst is efficient for both water oxidation and reduction. This talk will cover 2 strategies to improve charge separation; firstly, a Z-scheme, principally for suspension-based systems and secondly, thin film heterojunction photoelectrodes for photoelectrochemical (PEC) water splitting.
The Z-scheme is comprised of 2 semiconductors sandwiched in between a redox shuttle that effectively transfers charge between the materials for either oxidation or reduction reactions. Using this approach, we recently demonstrated an organic-inorganic Z-scheme system comprised of a metal oxide coupled with structure controlled, robust g-C3N4, capable of stoichiometric H2 and O2 evolution under visible light. This shows that g-C3N4 can be integrated into a nature-inspired water splitting system, analogous to PSII and PSI in natural photosynthesis. Recently, we have developed other photoactive polymers that could be used in such a system.
The materials design strategy is critically important to the mechanism for charge transfer. In terms of developing a water splitting device, we have shown that a 1D junction cascade photoelectrode consisting of nanoparticulate BiVO4 on 1D ZnO nanowire arrays with a cobalt phosphate (Co-Pi) surface OEC exhibits a dramatic cathodic shift in onset potential, 12-fold increase in photocurrent and STH value of 1% for PEC water oxidation. The reasons for the enhanced activity will be discussed in light of the limiting factors described earlier.
1. Moniz et al. Energy Environ. Sci., 2015, 8, 731-759.
2. Moniz et al., J. Am. Chem. Soc., 2014, 136, 12568.
3. Moniz et al., 2016, submitted
4. Moniz et al., Adv. Energy Mater., 2014, 4, 1301590.
12:00 PM - *EC4.6.03
Involved Elementary Processes and Deduced Design Principles of Photoelectrochemical Devices for Efficient H2 Generation
Wolfram Jaegermann 1
1 Technische Universität Darmstadt Darmstadt GermanyShow Abstract
Direct H2 formation by photoelectrochemical H2O splitting theoretically provides high light (photon) to fuel (H2) efficiency. From a theoretical analysis of the boundary conditions of efficient H2 production by photoelectrochemical cells a number of elementary processes as well as their coupling to each other must be optimized without severe losses in the number and the chemical potential of the originally generated electron-hole pairs. From a consideration of the given thermodynamic and kinetic energetic condition to split H2O only tandem or multifunction structures with a sufficient splitting of the quasi-Fermi level as evidenced by the achievable photo voltage of the photovoltaic component will be able to produce H2O in reasonable amounts. Thus the first duty is to optimize light converting devices structure in a similar way as it has to be done for electricity producing solar cells. This means that the transport lengths of charge carriers must exceed the thickness of the device, where the thickness of the absorber layer has to exceed the absorption length. Subsequently the separated charge carriers must be transferred to the reactants without loss in chemical potentials (photo voltage) and loss in photocurrent (recombination) across the solid electrolyte interface. For the involved multi electron transfer reactions usually solid state electro catalysts must be involved which stabilize reactive and energetically unfavourable intermediates. For minimizing loss mechanisms the energetic positions of the semiconductor band edges, of the electro catalyst’s Fermi level, and electrolyte density of states must arrange in a proper way under illumination. Thus the involved charge transfer steps must be coupled to the selective multi-electron transfer catalysts allowing electron transfer reactions with a nearly isoenergetic coupling of their electronic states which needs appropriate surface engineering strategies.
Because of these boundary conditions research and development of advanced thin film absorber materials for tandem and multijunction photovoltaics and efficient photoelectrochemical cells need in part the same research efforts and are limited by similar shortcomings. In our opinion with multi junction devices based on thin film absorber materials promising research and development routes to highly competitive PV and PEC cells are given which need, however, further systematic materials research efforts e. g. by combining theoretical design concepts and high throughput experimental validation.
12:30 PM - EC4.6.04
Resonant Soft X-Ray Scattering—A Versatile Technique for Spatio-Chemical Characterization of Solar Fuel Materials
Isvar Cordova 1 , Gregory Su 1 , Michael Brady 1 , Cheng Wang 1
1 Lawrence Berkeley National Laboratory San Francisco United StatesShow Abstract
The development of complex mesoscale (nm - µm) materials used for a wide range of solar fuel applications requires comparable evolution in the analytical instruments and techniques in order to understand the physical and chemical structure-property relationships underlying their performance. Conventional “hard” X-ray (i.e., > 10 keV) scattering has received considerable attention due to the fact that it is a high-resolution nondestructive structural probe that can interrogate a statistically significant 3-dimensional sample area. However, the physical nature of the scattering process at these energies limits its applicability to materials that possess significantly different electron densities. Unfortunately, the performance of many electrochemical materials often hinges on subtle heterogeneities, which do not possess sufficiently distinct electron densities to provide significant contrast. To help address this challenge, resonant soft X-ray scattering (RSoXS) uses tunable “soft” X-rays (i.e., 100 - 1500 eV) to dramatically enhance the scattering cross sections from heterogeneous materials when the X-ray photon energy is judiciously chosen to coincide with favored transitions near a material’s absorption edges. This combination of absorption spectroscopy and scattering enhances the scattering contrast due to specific chemistries over a large sample volume. In recent years, RSoXS performed near the carbon K-edge has proven to be a very useful tool for the soft matter researchers interested in defining chemical structure and molecular orientation of complex materials with nm-scale spatial sensitivity.1 Still, the full potential of RSoXS to study these processes is far from being fully explored by inorganic material scientists and electrochemists.
In this presentation, we will show some of the first experimental results demonstrating how RSoXS can be a powerful tool for the solar fuels community due to its chemical sensitivity, large accessible size scale, and polarization control.Specifically, we will reveal its ability to simultaneously interrogate the bulk, surfaces, and buried interfaces of low-Z element materials (including transition metals), such as those used as nanostructured photoelectrodes, catalysts, and ion exchange membranes. In addition, we will present recent developments we have made, on both the instrumental and device level, to enable operando and in-situ RSoXS characterization of electrochemical materials under reaction conditions in liquid and gaseous environments. The practical challenges and limitations of conducting such experiments will also be discussed, with the goal of developing a novel time-resolved reciprocal space probe that should ultimately be applicable to a broad range of scientific problems facing the solar fuels community.
 C. Wang, D.H. Lee, A. Hexemer, M.I. Kim, W. Zhao, H. Hasegawa, H. Ade, T.P. Russell, Nano Lett, 11 (2011) 3906-3911.
12:45 PM - EC4.6.05
Distinguishing the Effects of Heterogenized Molecular and Heterogeneous Ir-Based Catalysts on Photoelectrochemical Water Oxidation
Wei Li 1 , Da He 1 , Stafford Sheehan 2 , Yumin He 1 , Jim Thorne 1 , Xiahui Yao 1 , Yanyan Zhao 1 , Gary Brudvig 3 , Dunwei Wang 1
1 Boston College Chestnut Hill United States, 2 Catalytic Innovations LLC Adamsville United States, 3 Yale University New Haven United StatesShow Abstract
In response to the rising energy demand and corresponding pollution issues, H2 is one of the most promising renewable and sustainable energy candidates. Extracting H2 from H2O through solar water splitting enables recycle of H2O, and allows to collect and store solar energy into the simplest chemical bond, as nature accomplishes through photosynthesis. Among existing strategies, photoelectrochemical (PEC) water splitting promises a direct route for solar-to-chemical energy conversion. Successful implementations of the reaction often require the integration of catalysts with light absorbers, especially on photoanodes where four electron water oxidation reaction occurs with sluggish kinetics. Nevertheless, it is challenging to uncover the main causes of the performance enhancement by surface catalysts owing to their cumulative effects and the interface complexities, making it difficult to further improve these systems for practical applications. Here, we systematically compare two water-oxidation catalysts (WOCs) on a hematite (α-Fe2O3) photoelectrode by the combination of intensity modulated photocurrent spectroscopy (IMPS), photoelectrochemical impedance spectroscopy (PEIS) and kinetic isotope effects (KIE) measurements, aiming to shed light on working mechanism of the photoelectrode/catalyst interface. It is already known that the energetics of photoelectrode surface or charge transfer kinetics (or both) could be altered by the application of catalysts. And, significant research efforts have been devoted into heterogeneous WOCs due to their abundancy. However, their molecular structures and working mechanisms are poorly understood. In terms of molecular WOCs, their functionalities are well studied but how they affect photoelectrodes are still unclear. In this work, we found that when hematite photoanode is anchored with a thin layer of heterogenized molecular Ir WOC (het-WOC), the improved PEC performance is attributed to higher charge transfer rate monitored by IMPS while surface recombination rate remains almost the same. On the contrary, when hematite is decorated with a denser layer of heterogeneous oxide WOC (IrOx), the surface recombination rate is dramatically reduced. It is indicative that the het-WOC provides additional charge-transfer routes across the Fe2O3|H2O interface, while IrOx and analogous bulk metal-oxide catalysts replace the interface with a fundamentally different one. PEIS analysis of IrOx and het-WOC decorated hematite exhibiting larger capacitance of WOCs and smaller charge transfer resistance, respectively, provide additional strong support. In the end, KIE measurements highlight rate-determining steps for water oxidation by the het-WOC and IrOx are distinct.
EC4.7: Protection Layers
Tuesday PM, November 29, 2016
Sheraton, 2nd Floor, Independence East
2:30 PM - EC4.7.01
Titanium Oxide Crystallization and Interface Defect Passivation for High Performance Water Splitting with Schottky Junction MIS Photoanodes
Andrew Scheuermann 1 , John Lawrence 1 , Andrew Meng 1 , Kechao Tang 1 , Olivia Hendricks 1 , Christopher Chidsey 1 , Paul McIntyre 1
1 Stanford University Stanford United StatesShow Abstract
Atomic layer deposited (ALD) TiO2 protection layers may allow for the development of both highly efficient and stable photoanodes for solar fuel synthesis; however, the very different conductivities and photovoltages reported for TiO2-protected silicon anodes prepared using similar ALD conditions indicate that mechanisms that set these key properties are, as yet, poorly understood. In this report, we study hydrogen-containing annealing treatments and find that post-catalyst-deposition anneals at intermediate temperatures reproducibly yield decreased oxide/silicon interface trap densities and high photovoltage. A previously-reported insulator thickness-dependent photovoltage loss in metal-insulator-semiconductor Schottky junction photoanodes is suppressed. This occurs simultaneously with TiO2 crystallization and an increase in its dielectric constant. At small insulator thickness, a record for a Schottky junction photoanode of 623 mV photovoltage, is achieved, yielding a photocurrent turn-on at 0.92 V vs NHE or -0.303 V with respect to the thermodynamic potential for water oxidation.
2:45 PM - EC4.7.02
The Role of Ti3+ in TiO2 Surface Layers for Solar Hydrogen Production
Ibadillah Digdaya 1 , Paula Perez Rodriguez 1 , Bartek Trzesniewski 1 , Arno Smets 1 , Wilson Smith 1
1 Delft University of Technology Delft NetherlandsShow Abstract
Many high efficiency photoelectrode and photovoltaic materials are unstable in electrochemical environments, and thus require a protection layer to be deposited on their surface. Recently, the use of an amorphous titanium dioxide (TiO2) interfacial layer has been shown to extensively extend the durability of the photocathode material under photocatalytic conditions. Limited attention however has been given to the understanding of the corrosion mechanism and its correlation with the charge transfer process occurring at the TiO2/electrolyte interface. In our study, we found that the photocurrent of an amorphous silicon carbide (a-SiC) photocathode increases dramatically upon electrochemically reducing the TiO2 front layer, which we attributed to the high surface activity of the Ti3+ on the uncatalyzed amorphous TiO2. We investigated the effect of various electrochemical reduction treatment on the Ti3+ donor density, which is confirmed by x-ray photoelectron spectroscopy, and showed variation of photocurrent density.
Additionally, we examined the correlation of in situ- and post-thermal treatment of the Ti3+-doped amorphous TiO2 with its electrical conductivity as well as the catalytic activity. Using electrochemical impedance spectroscopy, we estimated the bulk electronic properties and analyzed the charge transfer kinetics which are responsible for the significant gain of onset potential and photocurrent density. Finally, we showed the prolonged stability of the a-SiC protected by the reduced-TiO2 and clarified its Faradaic efficiency. This high performance, very thin, earth-abundant and uncatalyzed photocathode is very promising for integration with smaller band gap solar absorbers to form a bias-free multi-junction photoelectrode for overall water splitting.
3:00 PM - *EC4.7.03
Water Splitting and the Making of Renewable Chemicals
Ib Chorkendorff 1
1 Technical University of Denmark Kongens Lyngby DenmarkShow Abstract
A short overview of the pros and cons of various tandem devices [1,2] will be given. The large band gap semiconductor needs to be in front, but apart from that we can chose to have either the anode in front or back using either acid or alkaline conditions. There seems to be a severe lack of good semiconductors that can provide an open circuit potential approaching EG-0.5V. Even those that can, which are usually small band gap materials like Si, are very prone to corrosion the advantage of using buried junctions and using protection layers shall be discussed [3-5]. In particular we shall show how doped TiO2 is a very generic protection layer for both the anode and the cathode . Next we shall discuss the availability of various catalysts for being coupled to these protections layers and how their stability and amount needed may be evaluated [7, 8, 9]. Here we shal demonstrate how mass selected clusters can be used for illuminating the activity of the various materials such as RUO2, Pt, and NiFe Oxides [8,9,10]. Examples of half-cell reaction using protection layers for both cathode and anode will be discussed though some of recent examples both under both alkaline and acidic conditions. Notably NiOx promoted by iron is a material that is transparent, providing protection, and is a good catalyst for O2 evolution [10,11]. Si is a very good low band gap semiconductor and the optimal thickness of this in a tandem device will be discussed . Finally if time allows we shall also discuss the possibility of making high energy density fuels by hydrogenation of CO2 instead of hydrogen evolution . We shall here show how we can investigate the recent ethanol synthesis on oxygen derived Cu found by Kanan et al. and show how acetaldehyde seems to be an important intermediate .
 A. B. Laursen et al., Energy & Environ. Science 5 5577 (2012)
 B. Seger et al. Energy & Environ. Science 7 2397 (
 B. Seger, et al. Angew. Chem. Int. Ed., 51 9128 (2012)
 B. Seger, et al., JACS 135 1057 (2013)
 B. Seger, et al., J. Mater. Chem. A, 1 (47) 15089 (2013)
 B. Mai et al. J. Phys. Chem. C 119 15019 (2015)
 R. Frydendal, et al. Chem.Elec.Chem 1 2075 (2014)
 E. A. Paoli, et al. Chemical Science, 6 190 (2015)
 E. Kemppainen et al. Energy & Environmental Science, 8 2991 (2015)
 B. Seboek et al. In Preparation (2016)
 B. Mei, et al. J. Phys. Chem. Lett. 5 1948 (2014)
 B. Dowon et al. Energy & Environ. Sci. 8 650 (2015)
 A. Verdaguer-Casadevall et al. J. Am. Chem. Soc. 137 9808 (2015)
 E. Bertheussen et al. Angewandte ChemieInt. Ed. 55 1450 (2016)
3:30 PM - EC4.7.04
Investigation the Conditions of the Conformal Shell Layers Formed by Different Types of PVD Techniques on Different Aspect Ratio Nanorods Arrays
Mesut Yurukcu 1 , Hilal Cansizoglu 2 , Mehmet Fatih Cansizoglu 3 , Tansel Karabacak 1
1 University of Arkansas at Little Rock Little Rock United States, 2 Department of Electrical and Computer Engineering University of California Little Rock United States, 3 Green Center for Systems Biology University of Texas Southwestern Medical Center Dallas United StatesShow Abstract
Manufacturing of batteries, solar cells, sensors and fuel cells have greatly depended on core/shell nanorods arrays and their coated forms due to the defect-free interface concerns, fabrication of the conformal shell layers on nanorod arrays has been a great challenge. Monte Carlo (MC) simulations to estimate the most favorable deposition condition to produce a conformal shell coating. For this reason, MC methods became a favored simulation technique for physical vapor deposition. We studied different height effects of the arrays on the conformality of the coating. Our results indicate that conventional PVD techniques, which offer low cost and large scale thin film fabrication, can be utilized for highly conformal and uniform shell coating formation in device applications.
3:45 PM - EC4.7.05
Wafer-Scale Transferable Molybdenum Disulfide Thin-Film Catalysts for Photoelectrochemical Hydrogen Production
Ki Chang Kwon 1 , Seokhoon Choi 1 , Ho Won Jang 1
1 Seoul National University Seoul Korea (the Republic of)Show Abstract
Hydrogen appears as a next-generation clean energy source to replace fossil fuels. One of the most promising ways to produce hydrogen is photoelectrochemical (PEC) water splitting. However, the existing photoelectrodes such as Si with noble metal catalysts still suffer from low efficiency and poor stability and the extremely high cost of the noble metal catalysts limits the wide use of water splitting photoelectrodes. Therefore, a novel approach is necessary to make a breakthrough for highly efficient PEC water splitting.
We have synthesized wafer-scale transferable molybdenum disulfide (MoS2) thin-film catalysts by using the thermolysis method for the first time. We have demonstrated that wafer-scale, transferable, and transparent thin-film catalysts based on MoS2, which consists of cheap and earth abundant elements, can provide the low overpotential of 1 mA/cm2 at 0.17 V versus a reversible hydrogen electrode and the high photocurrent density of 24.6 mA/cm2 at 0 V for a p-type Si photocathode. c-Domains with vertically stacked (100) planes in the transferable 2H-MoS2 thin films, which are grown by a thermolysis method, act as active sites for the hydrogen evolution reaction, and photogenerated electrons are efficiently transported through the n-MoS2/p-Si heterojunction.
Our results show that the MoS2 thin-film catalysts not only reduce the overpotential at electrolyte/solid interfaces but also stabilize the surface of solids for efficient water splitting using p-type semiconductor photocathodes including Si, InP, GaAs, and GaP. Our approach could be applied to the synthesis of various 2-dimensional transition metal dichalcogenides (TMDs) and the catalytic performance of the materials would be further enhanced using substitutional doping, defect engineering, and n-TMD/p-TMD heterojunctions.
EC4.8: Photo-Driven CO2 Reduction
Tuesday PM, November 29, 2016
Sheraton, 2nd Floor, Independence East
4:30 PM - *EC4.8.01
Co Oxide Core–Silica Shell Nanotubes with Embedded Molecular Wires as Photosynthetic Units for CO
2 Reduction by H
Heinz Frei 1
1 Lawrence Berkeley National Laboratory Berkeley United StatesShow Abstract
Closing the photosynthetic cycle on the shortest possible length scale – the nanoscale – is an important design principle of photosynthesis for minimizing side reactions, efficiency degrading charge transport processes and resistance losses. For completing the catalytic cycle of CO2 reduction by H2O on the nanoscale in an artificial photosystem, the half reactions need to be separated by an ultrathin proton transmitting, gas impermeable membrane. We are developing Co3O4-silica core-shell nanotube arrays in which each nanotube operates as an independent photosynthetic unit by oxidizing water on the inside while reducing carbon dioxide on the outside. The spaces of O2 evolution and reduced product are separated by the 2-3 nm thick dense phase silica shell. Charge transport across the silica layer is accomplished by embedded p-oligo(phenylenevinylene) molecular wires (OPPV, 3 aryl units).
To quantify electron transport through the embedded OPPV molecules, we conducted visible light sensitized photo-electrochemical measurements using cm2 sized planar Co3O4-silica/wire films prepared by atomic layer deposition on Pt.1,2 STEM-EDX, XPS and grazing angle ATR-FT-IR showed covalent attachment of the wires to a 5 nm uniform Co3O4 layer at a density of 1 wire per nm2. Photoelectrochemical measurement of visible light sensitized charge (hole) injection in short circuit configuration using sensitizer molecules with different redox potentials revealed that the HOMO and LUMO energetics of the wire molecules controls electron flow and allowed us to quantify the charge flux through this new nanoscale membrane for artificial photosynthesis. To understand the detailed charge transfer pathway through the membrane, ultrafast optical spectroscopy was conducted using spherical Co3O4-silica/wire particles in aqueous solution. Femtosecond excitation of a sensitizer adsorbed on the silica membrane revealed hole injection within a ps, which was monitored by the rise of the wire radical cation absorption band at 550 nm. Photocatalytic activity results of the core-shell nanotube construct will be presented.
Edri, E.; Frei, H. J. Phys. Chem. C 2015, 119, 28326.
Kim, W.; McClure, B. A.; Edri, E.; Frei, H. Chem. Soc. Rev. 2016, 45, 3221.
Frei, H. Curr. Opin. Chem. Eng. 2016, 12, 91.
5:00 PM - EC4.8.02
Design of Photonic and Plasmonic Materials for Photocatalytic CO2 Reduction
Ashley Gaulding 1 , Ian Sharp 1 , Francesca Maria Toma 1
1 Lawrence Berkeley National Laboratory Berkeley United StatesShow Abstract
This work explores the effects of photonic structuring and localized surface plasmon resonance (LSPR) and on CO2 reduction reactions (CO2RR). We design photonic crystals where the photonic bandgap is tuned by changing the periodicity of the inverse opal cavities. The photonic bandgap of an inverse opal structure can be tuned by the material and pore size/periodicity. These photonic properties control how the incoming light is reflected and refracted within the material. We investigate a variety of photonic crystal materials, such as metal oxides, by infilling the voids of an opal template of polystyrene (PS) spheres to obtain an inverse opal photonic crystal by subsequently removing the PS spheres.
Similarly, the LSPR can be tuned in metal or degeneratively doped semiconductor nanoparticles by tuning the size, shape, and material composition. This increases absorption near the resonance peak. Additionally, hot carriers can be generated as the LSPR decays, providing the potential to access kinetic pathways normally difficult for desired products in CO2RR chemistry. Since we can tune the photonic bandgap simply by changing the size of the PS spheres in the template, we can investigate how matching the photonic bandgap with the plasmonic resonance of a metal particle affects CO2 reduction. We then study the effects of combining both of these physics phenomena on chemical transformation and selectivity in CO2 reduction. From this basis, one could potentially tune CO2RR processes to a desired hydrocarbon fuel product.
We use a combination of SEM, TEM, and XRD to analyze the morphological structure and crystallinity of our materials as well as material composition via EDX. Surface analysis of our structures is done using XPS. We characterize the films’ optical properties, monitoring shifts in the photonic bandgap and LSPR, via UV-Vis-NIR spectroscopy. We monitor CO2 reduction products using in line GC for gas products and NMR for liquid products.
5:15 PM - EC4.8.03
Effects of Bicarbonate Electrolyte on Mass-Transport of CO
2 and Methane Production in Electrochemical CO
Hiroshi Hashiba 1 , Hiroki Sato 1 , Satoshi Yotsuhashi 1
1 Panasonic Corporation Kyoto JapanShow Abstract
Electrochemical reduction of carbon dioxide (CO2) is one of the key technologies which can create fuels like methane (CH4) combined with renewable energy sources such as solar and wind energy. However, copper (Cu) is the only catalyst which produces CH4 as a major product. To maximize the selectivity and production rate of CH4 on Cu, it is quite important to obtain systematic insights for the effect of reaction parameters in CO2 reduction, such as CO2 pressure, temperature, stirring speed (or flow rate) and electrolyte, on the mass transport of CO2 and resulting CH4 production.
Based on such a concept, the authors constructed a system with combinatorial reactors which enables multiple and simultaneous measurements under various experimental conditions. Previously, we clarified the role of CO2 pressure, stirring speed and temperature for the quantified CO2 supply (Jlim) and CH4 Faradaic efficiency with this system.1 Here, the scope was extended to the effect of electrolyte, especially between potassium chloride (KCl) and potassium bicarbonate (KHCO3), on the rate of CO2 supply and CH4 production from CO2.
Experiments are performed under 9 conditions in total, selecting CO2 pressure (1.3, 2, 3 atm) and the electrolyte (0.5 M KCl, 0.25 M KHCO3, 0.5 M KHCO3) under ambient temperature and no stirring condition. At each condition, current density dependences of Faradaic efficiencies of reaction products were obtained. In KHCO3, the current density dependences were different from those in KCl, where the peak of CH4 selectivity decreased but made long tail toward higher current density. However, the decreased peak of CH4 selectivity turned to increase with the CO2 pressurization in KHCO3 solutions. Our analysis clarified that the Jlim increased in KHCO3 compared to KCl, which means that more CO2 participate in the reaction in KHCO3 even under the same CO2 pressure. The analysis also showed that the KHCO3 concentration could be the important factor for controlling Jlim. In the presentation, we will discuss the possible mechanisms for the increase of CO2 supply in KHCO3 as well as the comparison of electrolyte better for CH4 production from the practical viewpoint.
1 H. Hashiba et al., ACS Comb. Sci., 2016, 18 (4), pp 203–208
5:30 PM - EC4.8.04
Third-Generation Conjugated Polymers for Photoelectrochemical Reduction of Carbon Dioxide
Dogukan Apaydin 1 , Elisa Tordin 1 , Engelbert Portenkirchner 1 , Gottfried Ausfischer 1 , Stefanie Schlager 1 , Melanie Weichselbaumer 1 , Kerstin Oppelt 2 , Niyazi Serdar Sariciftci 1
1 Linz Institute for Organic Solar Cells, Physical Chemistry Linz Austria, 2 Institute of Inorganic Chemistry Johannes Kepler University Linz Linz AustriaShow Abstract
Third-generation conjugated polymers are functionalized polymers for a specific purpose introducing a new property on top of the semiconducting and conducting properties. As an example here, for the catalytic function we prepared polythiophenes, bearing Rhenium carbonyl complexes and pyridinium pendant groups as active sites to drive the photoelectrochemical reduction of CO2. Cyclic voltammetry and controlled potential electrolysis experiments were performed in CO2-saturated acetonitrile and acetonitrile-water solutions under illumination as well as in dark. The formation of CO as main product was confirmed with IR spectroscopy and quantified with gas chromatography in the case of poly-[Re-(4-methyl-4'-(7-(thiophen-3-yl)heptyl)-2,2'-bipyridyl)tricarbonyl chloride] (P[3HRe(bpy)CO3Cl-Th]) giving a max. Faradaic efficiency of 2.5% and a TON of 20. In the case of poly- [4-(7-(thiophen-3-yl)heptyl)pyridine] (P[3HPyr-Th]) which was supposed to catalyse CO2 to MeOH reaction, no products were observed.This strongly indicates that the pyridinium ion should be mobile in order to act as an electron shuttle leading to 6e- reduction. With this study, we introduce a method in which can be applied to other widely used molecular homogeneous catalysts in the field in order to pave the way to use them as heterogeneous ones.
5:45 PM - EC4.8.05
Enhanced Photoelectrochemical CO2 Reduction by Surface Modification of CuFeO2 Photocathodes
Seokwon Lee 1 , Whi Dong Kim 1 , Kangha Lee 1 , Sunil Jeong 1 , Do Joong Shin 1 , Doh Lee 1
1 Korea Advanced Institute of Science and Technology Daejeon Korea (the Republic of)Show Abstract
Nowadays, efficient solar conversion of carbon dioxide (CO2) to hydrocarbon fuels, such as carbon monoxide, formic acid, methanol, and methane, has been a holy grail with pressing environmental issues that are presumed to result from CO2 emission. Relatively staggering progress in the current state-of-the-art conversion efficiency and selectivity is a ramification of chemical stability and low solubility of CO2 as well as complicated multi electron-involving intermediate reactions. Recently, delafossite materials (CuMO2, M=Fe, Cr, Al, etc) have been reported as a promising class of p-type semiconductors due to its narrow bandgap, favorable band edge position and good stability. It has been highlighted in previous studies that CuO/CuFeO2 heterostructures formed by one-step air annealing process is highly stable and efficient for conversion of CO2 into formate even without an external bias. However, it is still ambiguous as to what causes the enhancement in activity and stability, since the heterostructures have not been comprehensively characterized in terms of its crystallinity and morphology. To elucidate the role of structures in the structure-property relationship in detail, we started with the synthesis and analysis of CuFeO2 and CuO.
PEC experiments were performed in a three-electrode setup, with a Ag/AgCl/KCl(sat.) reference electrode (E=+0.210 V versus NHE) and a platinum counter electrode, using an aqueous potassium bicarbonate (0.1 M KHCO3) electrolyte. A simulated solar light (AM 1.5G; 100 mW/cm2) was irradiated after purging with CO2 gas for 30 min. CuFeO2 photocathode showed negligible photocurrent, 15 uA/cm2 with severe spike evolution unlike the previous report. After addition of CuO, photocurrent reached to 74 uA/cm2 with significantly reduced spike. Despite of this huge enhancement, the photo-activity was still too low compared to the reported one. Surprisingly, by post heat-treatment under air atmosphere, the photocurrent increased further up to 150 uA/cm2. This was closely related to the surface reconstruction of CuFeO2 into CuO and CuFe2O4, which can make the surface more active toward CO2. In addition, it was also revealed by impedance spectroscopy that heterojunction between these materials facilitates charge separation. In conclusion, CuFeO2, itself, is not a good choice for CO2 reduction due to its inactive surface. However, surface modification by controlled post heat-treatment can make this shortcoming overcome. Even though the photocurrent density is still much lower than the state-of-the-art one, we clearly demonstrated that the importance of surface engineering of delafossite materials for CO2 reduction. Based on these findings, we believe that these findings may pave a new way of how delafossite materials should be engineered to be an efficient CO2 conversion photocathode.
EC4.9: Poster Session
Tuesday PM, November 29, 2016
Hynes, Level 1, Hall B
9:00 PM - EC4.9.01
Semiconductor Band Edge Tuning by Surface Modification—Organic Dipoles on WO3
Rene Wick 1 , David Tilley 1
1 Departement of Chemistry Universität Zürich Zürich SwitzerlandShow Abstract
Metal oxide semiconductors are under intense investigation for photoelectrochemical (PEC) water splitting due to their stability in aqueous electrolyte, which is critical for the advancement of PEC technology. Tungsten trioxide is one of the few stable oxide semiconductors with a band gap small enough to absorb visible light (Eg = 2.5 eV) and is therefore frequently investigated as a photoanode in PEC water splitting. However, like other smaller bandgap oxides, the position of the conduction band of WO3 is below the thermodynamic potential for proton reduction of 0 V vs. RHE, while the valence band position provides much more driving force than is required for the oxidation of water (too much overpotential). The photovoltage generated by the oxide could be better utilized by shifting the band edge energies through the introduction of a dipole layer on the semiconductor-liquid interface, a strategy that has been applied successfully for TiO2 and Si.
In this work, we show our effort to tune the band edges of a model oxide (WO3) by modifying the semiconductor surface with organic dipoles. We used simple methods to adsorb a monolayer of substituted phenylphosphonic acids on electrodeposited WO3. Impedance spectroscopy and Mott-Schottky analysis were used to measure the flat band potential. A series of substituted phenylphosphonic acids shifted the bands by up to +300 mV. These results suggest that the choice of a suitable organic dipole molecule could allow unassisted water splitting by WO3, if these dipole molecules could be stabilized on the surface.
9:00 PM - EC4.9.02
Capturing Structural Dynamics of Photocatalyst by Picosecond Time-Resolved X-Ray Spectroscopy
Shin-Ichi Adachi 1
1 Photon Factory, KEK Tsukuba JapanShow Abstract
Picosecond time-resolved X-ray techniques, such as time-resolved X-ray diffraction, scattering, and spectroscopy, utilize the pulsed nature of synchrotron radiation from storage rings, and are becoming general and powerful tools to explore structural dynamics in various materials. This method enables to produce “atomic structural movies” at picosecond temporal resolution. It will be fascinating to apply such capability to capture ultrafast structural dynamics in advanced materials of strongly-correlated electron systems, photochemical catalytic reaction dynamics in liquid or on solid surface, light-induced response of photo-sensitive proteins, etc.
For example, ultrafast X-ray spectroscopy offers new opportunities for elucidating ultrafast structural dynamics both in solid and solution. X-ray absorption fine structure (XAFS) spectroscopy reveals details about the local geometric and electronic structure around selected atoms. Extended X-ray absorption fine structure (EXAFS) provides accurate bond distances, while X-ray absorption near-edge structure (XANES) delivers additional information about unoccupied orbitals and spin configurations.
Photon Factory Advanced Ring (PF-AR) at the High Energy Accelerator Research Organization (KEK), Tsukuba, Japan is a 6.5-GeV electron storage ring dedicated for single-bunch operation and is suitable for such time-resolved X-ray studies. An in-vacuum undulator beamline NW14A at the PF-AR was designed and constructed to conduct a wide variety of time-resolved X-ray measurements, such as time-resolved X-ray diffraction, scattering and spectroscopy. Successful examples of time-resolved XAFS studies applied to photocatalyst will be presented.
9:00 PM - EC4.9.03
Synthetic Routes towards Inhibition/Passivation of Defects Resulting from Zn Volatilization in (Ga1-xZnx)(N1-xOx) Photocatalysts
Dennis Chen 1 , Sara Skrabalak 1
1 Indiana University Bloomington United StatesShow Abstract
Solar-driven water-splitting (2H2O → 2H2 + O2) has the potential to address the global energy demand. Most artificial solar water-splitting processes are mediated by semiconductors that absorb solar radiation and facilitate photo-generated charge carriers to their respective active sites to generate H2 and O2. However, no known semiconductor is capable of satisfying the stringent material requirements for cost-effective implementation of solar-driven water-splitting. The cocatalyst-loaded (Ga1-xZnx)(N1-xOx) (GZNO) solid solution absorbs visible-light, exhibits greater operational stability than its binary component parents, and displays the largest apparent quantum yield among visible-light-driven water-splitting photocatalysts.1 Despite its proof-of-concept performance, the apparent quantum yield of GZNO is far from its theoretical limit. Here we show that photocatalytic inefficiencies may be attributed defects resulting from the loss of Zn during the nitridations process. Incorporation of a ZnO buffer layer during the nitridation process suppresses Zn volatilization to yield GZNO with similar Zn content as the parent material. In addition, we have synthesized Sn-doped GZNO microcrystals and investigated the role of Sn in defect passivation. Neutron and X-ray diffraction techniques were used to elucidate the average (via Rietveld analysis) and local structure (via pair distribution function analysis and reverse Monte Carlo modeling) of GZNO and Sn-doped GZNO microcrystals. Structural investigations were complemented with spectroscopic techniques and photochemical measurements, with the aim of developing structure-property relationships towards a better understanding of photocatalysts.
1. (a) Ohno, T.; Bai, L.; Hisatomi, T.; Maeda, K.; Domen, K., Photocatalytic Water Splitting Using Modified GaN:ZnO Solid Solution under Visible Light: Long-Time Operation and Regeneration of Activity. Journal of the American Chemical Society 2012, 134 (19), 8254-8259; (b) Fabian, D. M.; Hu, S.; Singh, N.; Houle, F. A.; Hisatomi, T.; Domen, K.; Osterloh, F. E.; Ardo, S., Particle suspension reactors and materials for solar-driven water splitting. Energy & Environmental Science 2015, 8 (10), 2825-2850.
9:00 PM - EC4.9.04
Understanding the Origin of Low Photovoltage for Ta3N5 as a Water Splitting Photoanode
Yumin He 1 , Jim Thorne 1 , Cheng Hao Wu 2 , Peiyan Ma 3 , Qi Dong 1 , Chun Du 1 , Jinghua Guo 2 , Dunwei Wang 1
1 Boston College Chestnut Hill United States, 2 Advanced Light Source, Lawrence Berkeley National Laboratory Berkeley United States, 3 Wuhan University of Technology Wuhan ChinaShow Abstract
As an intrinsic n-type semiconductor, Ta3N5 has the flat-band potential around -0.2 to 0 V vs. normal hydrogen electrode (NHE), meaning that over 1 V of photovoltage can be potentially harvested from this material for solar water splittin. Together with the theoretical photocurrent of 12.9 mA/cm2, 15.9% solar to hydrogen efficiency is possible. Indeed, the benchmark photocurrent of 12.1 mA/cm2 at 1.23 V vs reversible hydrogen electrode (RHE) has been reported recently. However, the turn-on potentials for water oxidation in almost all literature still remain positive than 0.6 V vs RHE even with intentional doping, and the long-term stability for water oxidation remains poor. In this presentation, we report a detailed study on how the surface oxidation of Ta3N5 and the intermediates produced during water oxidation process result in the Fermi level pinning, which greatly reduces the measurable photovoltages in Ta3N5. Based on the results of detailed X-ray photoelectron spectroscopy and photoelectrochemical measurement in aqueous/nonaqueous system, the origin of the low photovoltage for water oxidation is quantitatively identified as the formation of surface states on the Ta3N5/water interface. These states pin the surface Fermi level and lead to a photovoltage loss of 0.4 V. The instability of Ta3N5/water interface under the PEC water oxidation condition presents challenges for the selection of suitable protective material and oxygen evolution catalyst. This study provides important guidelines for future development of nitride semiconductors for solar energy harvesting/storage applications.
9:00 PM - EC4.9.05
New Molecular Solar Fuel Exhibiting Excellent Solar Energy Storage and Large Heat Release in Real World Device
Zhihang Wang 1 , Anna Roffey 1 , Anders Lennartsson 1 , Maria Quant 1 , Ambra Dreos 1 , Karl Borjesson 2 , Kasper Moth-Poulsen 1
1 Chalmers University of Technology Göteborg Sweden, 2 University of Gothenburg Göteborg SwedenShow Abstract
With limited access to fossil fuels, increasing world energy consumption will become a key challenge for future society.1 One of the sustainable solutions to this problem is the utilization of solar energy. However solar energy is an intermittent source, so storage also becomes an issue.
A switchable energy storage technology known as MOST (molecular solar thermal)2 can store and release solar energy on demand by using a well-designed photoswichable molecule. Exposing one such compound to sunlight generates a photoisomer with a potentially long storage lifetime. When energy is required, the photo isomer can be back converted to its initial state by use of a catalyst or heat. The stored solar energy is then released in the form of extra heat.
Our work mainly focuses on three parts: a). The development of new molecules whose absorption matches well to the solar spectrum, possess a long half-life and have low molecular weight. b). The development of new catalysts for heat release. c). Design and implementation of MOST systems in functional devices.3 Here we synthesized a new compound with a high energy density (396 kJ/kg), and combined it with a new improved device.4 This new material has been tested in real outdoor conditions and showed high potential for future use.
1. K. Moth-Poulsen, D. Coso, K. Borjesson, N. Vinokurov, S. K. Meier, A. Majumdar, K. P. C. Vollhardt and R. A. Segalman, Energy & Environmental Science, 2012, 5, 8534-8537.
2. Z.-i. Yoshida, Journal of Photochemistry, 1985, 29, 27-40.
3. K. Borjesson, D. Dzebo, B. Albinsson and K. Moth-Poulsen, Journal of Materials Chemistry A, 2013, 1, 8521-8524.
4. V. Gray, A. Lennartson, P. Ratanalert, K. Borjesson and K. Moth-Poulsen, Chem Commun (Camb), 2014, 50, 5330-5332.
9:00 PM - EC4.9.06
Synthesis and Photocatalytic Properties of Iron-Disilicide/SiC Composite Powder
Kensuke Akiyama 1 2 , Yuu Motoizumi 1 , Tetsuya Okuda 1 , Hiroshi Funakubo 2 , Hiroshi Irie 3 , Yoshihisa Matsumoto 1
1 Kanagawa Industrial Tech Ctr Ebina Japan, 2 Department of Materials Science and Engineering School Tokyo Institute of Technology Yokohama Japan, 3 Clean Energy Research Center University of Yamanashi Kofu JapanShow Abstract
Photocatalytic water-splitting is an ideal method for solar energy harvesting. Since Honda and Fujishima first reported the water-splitting using TiO2 with Pt photoelectrodes, some photocatalysts that can split water under UV light have been discovered. However, development of visible-light sensitive photocatalysts is indispensable due to the effective utilization of incoming solar energy. On the other hand, semiconducting iron disilicide (β-FeSi2) has been attracting a great deal of attention as a photo-detector and Si-based light emitter operating at wavelengths suitable for optical fiber communications (1.55 μm). This is because β-FeSi2 has a band gap of approximately 0.80 eV and a very large optical absorption coefficient over 105 cm−1 at 1 eV. Moreover, this semiconducting material is composed of the elements which are naturally abundant and less toxic than the elements used in conventional compound semiconductors.
In this paper, we report on the novel fabrication method of β-FeSi2/3C-SiC composite powder by using metal-organic chemical vapor deposition (MOCVD) method which is general in semiconductor process technology. Moreover, we repot on the hydrogen evolution over this composite powder under irradiation of not only UV but also visible light and near-infrared light from methyl-alcohol aqueous solution.
10-nm-thick gold (Au) was deposited on the surface of 3C-SiC powder, average diameter of 60nm, at room temperature by rf-sputtering. β-FeSi2 was deposited on the Au-coated 3C-SiC powder by using MOCVD. Iron pentacarbonyl [Fe(CO)5] and monosilane (SiH4) were used as sources, and the deposition temperature and deposition rate were 923 K and 1.6 nm/min, respectively. XRD θ-2θ scan profile showed the formation of poly-crystalline β-FeSi2 phase for the powder after MOCVD deposition of 1 hour. From the SEM observation of this composite powder, the inhomogeneous grains with sizes of the order 10 nanometers were confirmed to be formed on the 3C-SiC surface. The hydrogen gas was evolved by irradiation of UV light (250-430 nm) from methyl-alcohol aqueous solution. Moreover, similar hydrogen evolution was confirmed under visible light (420-650 nm) and near-infrared light (1050-1600 nm) light irradiation.
9:00 PM - EC4.9.07
10-Fold Enhancement in Light-Driven Water Splitting Using Niobium Oxynitride Microcone Array Films
Nageh Allam 1
1 American University in Cairo New Cairo EgyptShow Abstract
We demonstrate, for the first time, the synthesis of highly ordered niobium oxynitride microcones as an attractive class of materials for visible-light-driven water splitting. As revealed by the ultraviolet photoelectron spectroscopy (UPS), photoelectrochemical and transient photocurrent measurements, the microcones showed enhanced performance (~1000% compared to mesoporous niobium oxide) as photoanodes for water splitting with remarkable stability and visible light activity. Finally, this proposed platform of microcones array films holds promise for a variety of applications of the future design of optoelectronic devices.
9:00 PM - EC4.9.08
Hematite Surface Activation by Thermal Treatment under Nitrogen Atmosphere
Andre Luiz Freitas 1 , Flavio De Souza 1
1 Federal University of ABC Santo Andre BrazilShow Abstract
Hematite has been widely investigated for application in photoelectrochemical cell (PEC) as photoanode due to its physical and chemical characteristics. This work describes a systematic investigation on hematite photoanode preparation via hydrothermal microwave-assisted process. The photoanodes were growth varying the synthesis time (from 1 to 5 hours) onto commercial glass substrate covered with fluorine doped-tin oxide conductive coating. To complete the electrode preparation, it was subjected to an additional thermal treatment at 750°C for 30 min in different atmosphere (air or N2). Then, all photoanodes were evaluated using a combination of techniques to observe the impact of the synthesis time and atmosphere of thermal treatment on its performance. Top view scanning electron microscopy images exhibit photoanodes composed by nanorods homogeneously distributed onto glass substrate area with thickness varying from 80 to 400 nm. From X-ray diffraction patterns of pure hematite phase with nanorods showed a preferentially oriented toward to (110) diffraction plane. The highest current density response under sunlight illumination was obtained for hematite photoanode obtained at 4 hours of synthesis time and thermal treated in N2 atmosphere. The impedance spectroscopy (EIS) was carried out in dark conditions and Nyquist plot showed that the hematite thermal treated with N2 exhibit lowest resistance for charge transfer. Additionally, the EIS data were analyzed by Mott-Schottky plot and the donor density was estimated around 3.1 1019 cm-3 and 1.3 1020 cm-3 for hematite photoanodes treated in air and N2, respectively. In fact, Finally, the catalytic efficiency was investigated under sunlight irradiation in presence of electrolyte H2O2-modified. Hematite photoanodes with thermal treatment in presence of N2 showed an integrated catalytic efficiency around 77%. This finding showed that the N2 atmosphere could favor the chemical reaction at hematite surface enhancing it catalytic performance under sunlight irradiation.
We gratefully acknowledge financial support from the Brazilian agencies of FAPESP (Grants 2011/19924-2 and 2014/11736-0).
9:00 PM - EC4.9.09
Understanding Fundamental Electrical and Photoelectrochemical Behavior of Hematite Photoanode
Mario Soares 1 , Ricardo Goncalves 1 , Icamira Nogueira 2 , Jefferson Bettini 3 , Adenilson Chiquito 1 , Edson Leite 1
1 Federal University of São Carlos São Carlos Brazil, 2 Federal Institute of Maranhão São Luís Brazil, 3 Brazilian Nanotechnology National Laboratory Campinas BrazilShow Abstract
A photoelectrochemical cell (PEC) is an elegant and feasible way to convert solar energy into fuel.1 In a PEC system, a semiconductor photocatalyst captures solar energy and subsequently splits water into hydrogen (H2) and oxygen (O2). The O2 is generated in the photoanode (PA) and the H2 in the cathode or photocathode. Hematite (α-Fe2O3), an n-type semiconductor with high photoelectrochemical stability, is considered the most promising material to be used as a PA. However, its use presents many challenges, but the main is electron/hole recombination that can occur in bulk, in solid-solid and solid-liquid (electrolyte) interfaces.2,3 It is clear that the variety of recombination pathways is related to the thin film morphology of hematite PA, and the morphological complexity makes it harder to identify the dominant losses process and to assess how these processes impact the final PA performance. Therefore, we used the simplest hematite PA, i.e., a sintered polycrystalline hematite electrode and we will show how the addition of Sn4+ (as dopant) and the heat treatment atmosphere modifies the electrical properties of the sintered ceramic pellet as well as impacts the electrochemical and photoelectrochemical properties in this PA. The results obtained allowed us to conclude that the addition of Sn4+ decreases the grain boundary resistance of the hematite polycrystalline electrode. Heat treatment in a nitrogen (N2) atmosphere also contributes to a decrease of the grain boundary resistance, supporting the evidence that the presence of oxygen is fundamental for the formation of a voltage barrier at the hematite grain boundary. The N2 atmosphere affected both doped and undoped sintered electrodes. We also observed that the heat treatment atmosphere modifies the surface states of the solid-liquid interface, changing the charge-transfer resistance.
9:00 PM - EC4.9.10
Titanium Dioxide Nanotubes/Ternary Metallic Catalysts Heterojunctions—A Step towards Selective Solar-Driven CO
Ahmed Khalifa 1 , Nageh Allam 1
1 American University in Cairo Cairo Governorate EgyptShow Abstract
The consumption of the world’s fossil fuels and their hazardous pollution impact on the atmosphere, makes the photoelectrocatalytic reduction of carbon dioxide a promising option to recycle this major green house gas. In the reduction of aqueous carbon dioxide, water would be the source of both the electrons and hydrogen atoms. However, the protons in solution compete to form hydrogen. This process can be made more selective with the use of metal catalysts. We report on the novel use of bi- and tri-metallic catalysts deposited on titania nanotubes using ALD and their photoelectrocatalytic activity for energy efficient, highly selective, and less competitive reduction of aqueous CO2. Titania nanotubes were fabricated by anodization then coated with Cu, Cu-Pt and Cu-Pt-Pd atomic layers using ALD. The objective of this setup is to combine the catalytic activity of metals with the stability of semiconducting photocathodes. The heterojunction electrodes were fully characterized by FESEM, TEM, XRD and XPS techniques. Under illumination with a 500 W xenon light source; light intensity, 100 mW cm-2, the onset reduction voltage showed a positive shift for all the prepared samples. The results showed a synergistic effect between the Cu-Pt and Cu-Pt-Pd catalysts. Results clearly demonstrated the potential of a suitable technology for the reduction of CO2.
9:00 PM - EC4.9.11
Photocatalytic Reforming of Formic Acid and Hydrogen Generation under Visible Light Using Pure and Ca Doped Nano BiFeO3.
Wegdan Ramadan 1 , Detlef Bahnemann 1 2
1 Institut für Technische Chemie Leibniz Universität Hannover Hannover Germany, 2 Photoactive Nanocomposite Materials Saint Petersburg State University Saint Petersburg Russian FederationShow Abstract
Hydrogen as fuel is gaining more momentum with time due to the rapid progress in materials science and the urgent need for clean sources of energy. Here we report on the photocatalytic reforming of formic acid using pure and Ca doped Bi ferrite, BFO and BCFO, respectively. Nanostructures BFO and BCFO were synthesized using facile sol-gel method with calcined temperature of 550 °C, characterized using XRD, TEM, UV-vis, etc. Ca doping decreased particles size from around 70 nm down to 20 nm and increased surface area by 3 times. The calculated band gap of BFO was found to be 2.5 eV making it good visible light photocatalyst. Formic acid concentration was 10 mmol and the photocatalytic reaction was carried out in a double jacket quartz glass photoreactor connected to a quadrupole mass spectrometer (QMS) for gas analysis. Reforming of formic acid gives H2 and CO2. The use of a co-catalyst and/or doping is expected to enhance the H2 production.
9:00 PM - EC4.9.12
Investigating the Effect of Molecular Compounds on the Hole-Conducting Properties of TiO2-Protected Silicon Photoanodes
Laurent Severy 1 , Jan Philip Kraack 1 , Thomas Moehl 1 , Peter Hamm 1 , David Tilley 1
1 University of Zurich Zürich SwitzerlandShow Abstract
In the field of renewable synthetic fuel production, photoelectrochemical (PEC) water splitting takes an increasingly important role in providing routes to hydrogen and other hydrocarbons. One of the main challenges around the oxygen evolution reaction (OER) arises from the incompatibility of most photoanode materials with the highly oxidizing conditions under operation in strongly basic or acidic aqueous media.
By protecting the photoanode material, this problem may be resolved. As Lewis , has shown, TiO2 can be used as such a material. It exhibits excellent stability in both acidic and basic aqueous solutions and shows hole conductivity when a metal catalyst such as Ir, Pt or Ni is deposited. Without the addition of these metal overlayers, the TiO2 is blocking.
Our goal is to investigate if the “leakiness” of ALD-deposited TiO2 is compatible with other materials, specifically polymeric hole-conductors and molecular catalysts. Having reproduced the hole-conductive character of ALD-TiO2 with sputtered Pt, we report our results of the TiO2-molecule system, using ferrocene anchored via a phosphonate group as a model compound for a molecular water oxidation catalyst.
 Hu, S., Shaner, M., Beardslee, J., Lichterman, M., Brunschwig, B., Lewis, N., Science, 2014, 6187, 1005-1009.
 Lichterman, M., Carim, A., McDowell, M., Hu, S., Gray, H., Brunschwig, B., Lewis, N., Energy Environ. Sci., 2014, 7, 3334-3337.
9:00 PM - EC4.9.13
Investigation of Novel Photoelectrode Materials Based on WO 3—A Next Generation for Energy Harvesting
Hala Handal 1 , Safaa El-sherif 3 , Nageh Allam 2 , Nabil Abdel Ghany 3
1 Inorganic Chemistry National Research Centre Cairo Egypt, 3 physical Chemistry National Research Centre Cairo Egypt, 2 Physics American university New Cairo EgyptShow Abstract
Photoelectrochemical water splitting (PEC) is one of the alternative ways to produce energy using sun light. Thus, intensive work has been devoted to produce an efficient photoelectrode by revisiting the state-of-the-art materials or tailoring new ones. In this study, we report the synthesis, characterization and optical properties of transition metal-doped WO3 (TM-W). In addition, we attempt to synthesis composites of WO3/perovskite phase (W-P) and WO3/carbon nanotubes (W-CNT) in order to establish a heterojunction that is expected to improve the photoconversion efficiency through enhancing the visible light absorption and minimizing charge recombination. Wet chemistry methods have been adopted to prepare highly surface area compositions. Alot of efforts have been taken during composites preparation to assure a good contact between the particles within the composite matrix and the synergistic interaction between the oxide phases and the CNT is explored. All the powders have been characterized by XRD, IR, TG and SEM. The prepared materials are tested under illumination and their optical properties have been thorouly studied. A correlation between the microstructure and the electrical and the optical behaviour is discussed.
9:00 PM - EC4.9.14
Fe2TiO5-Based Photoanodes for Water Oxidation
Wei Cui 1 , Thomas Moehl 1 , David Tilley 1
1 Department of Chemistry University of Zurich Zurich SwitzerlandShow Abstract
Following the report of Fujishima and Honda in 1972, photoelectrochemical (PEC) water splitting has been developed considerably as a promising method to convert solar energy into clean hydrogen fuel. To address the issue of stability in aqueous media, numerous efforts have focused on oxides, particularly n-type semiconductors which serve as photoanodes. Fe2TiO5 is a robust and abundant oxide with a small band gap (~2.1 eV), capable of absorbing a significant part of the visible spectrum. Moreover, the conduction band is significantly more negative than the more widely studied hematite, leading to a much earlier onset of photocurrent. Here we demonstrate the synthesis of stoichiometric Fe2TiO5 thin films via spin-coating on transparent conductive substrates and employ them as efficient photoanodes exhibiting good photocurrents and durability. Various strategies for enhancing PEC performance have been explored, including extrinsic doping, catalyst loading, nanostructuring and hetero-junction fabrication.
 Fujishima, A.; Honda, K. Electrochemical Photolysis of Water at a Semiconductor Electrode. Nature, 1972, 238, 37-38.
 Walter, M. G.; Warren, E. L.; McKone, J. R.; Boettcher, S. W.; Mi, Q.; Santori, E. A.; Lewis, N. S. Solar Water Splitting Cells. Chem. Rev., 2010, 110, 6446– 6473.
 Liu, Q.; He, J.; Yao, T.; Sun, Z.; Cheng, W.; He, S.; Xie, Y.; Peng, Y.; Cheng, H.; Sun, Y.; Jiang, Y.; Hu, F.; Xie, Z.; Yan, W.; Pan, Z.; Wu, Z.; Wei, S. Aligned Fe2TiO5-Containing Nanotube Arrays with Low Onset Potential for Visible-Light Water Oxidation. Nat. Commun., 2014, 5: 5122.
9:00 PM - EC4.9.15
Shell Thickness Effects on the Z-Scheme Band Alignment of Core/Shell Nanorod Electrodes
Ki-Hyun Cho 1 , Joo-Won Lee 1 , Yun-Mo Sung 1
1 Korea University Seoul Korea (the Republic of)Show Abstract
A mild solution approach enabled the growth of 1-dimensional CdS nanostructures having high-density and uniform morphology on FTO substrates. It has been well known and proved that vertically aligned 1-D nanostructures can provide the enormous reaction sites and fast charge transport, resulting in the improved photocatalytic performance compared to thin films. Subsequently, the CdO shell was formed on nanorods successfully via the dip coating method. We controlled the thickness of CdO shell on CdS nanorods to obtain the optimum photoelectrochemical performance. The combination of CdS and CdO introduced the Z-scheme energy band structure that caused the increase of PEC performance due to the effective charge separation and higher photovoltage in comparison with bare CdS nanorod electrodes. When the shell thickness was ~3 nm, CdS/CdO nanorod electrodes showed the photocurrent density of ~4.3 mA/cm2 at 0 V (vs. SCE). As the shell thickness increased, however, the photocurrent onset potential moved toward the cathodic direction and the photocurrent density became lower in the overall range of the voltage.
To understand the carrier transport behavior between CdS and CdO regarding the shell thickness, we estimated the depletion region width of CdO and the band diagrams with respect to the shell thickness. When the thickness is smaller than ~3 nm, only the space charge region exists in CdO shell, which results in the facile charge separation. When the shell thickness becomes larger than ~3 nm, however, there exists the bulk state which requires the external voltage for effective carrier transportation.
To conclude, the optimum thickness of CdO shell on CdS nanorod electrodes for the effective Z-scheme band structure was estimated to be ~3 nm. Due to the shell thickness smaller than the width of space charge region, the electrons and holes in CdO can be easily separated, which accelerates the photocatalytic reactions on each electrode surface.
9:00 PM - EC4.9.16
Surface Processes at the Photoanode/co-Catalyst/Electrolyte Interface Studied by Intensity Modulated Photocurrent Spectroscopy Using BiVO4 Photoanodes as a Model System
Carolin Zachaeus 1 , Fatwa Abdi 1 , Roel Van de Krol 1
1 Helmholtz-Zentrum Berlin für Materialien und Energie GmbH Berlin GermanyShow Abstract
Metal oxides have emerged as attractive candidates for photoelectrochemical water splitting, mainly due to their good stability in aqueous solutions, easy synthesis, and low cost. However, in the past, metal oxide photoanodes, such as BiVO4 or Fe2O3, suffered from a low charge injection efficiency. To enhance the performance of these metal oxides for water splitting, their surfaces are usually functionalized with water oxidation catalysts (e.g. CoPi, RhO2, FeOOH, NiFeOx, MnOx). However, the true nature of semiconductor/catalyst/electrolyte interactions and the improvement mechanisms are still unclear, and require further attention.
In this study, we used intensity modulated photocurrent spectroscopy (IMPS) to examine the surface charge carrier dynamics of spray-deposited bismuth vanadate (BiVO4) photoanodes and to understand the role of a co-catalyst layer and its relation to the semiconductor’s limitation. A LED was used to illuminate the sample with a modulated intensity, and the real and imaginary parts of the opto-electrical impedance were recorded. To interpret the resulting spectra, we used a model developed by Peter et al. that allows one to distinguish the rate constants for surface recombination and charge transfer at the electrode surface. By comparing the bare and the co-catalyzed photoanode systems, we found that the photocurrent of BiVO4 is mainly limited by surface recombination. The surface recombination was significantly reduced, when CoPi and NixMnyOz were deposited on the BiVO4 photoanodes, whereas the charge transfer did not increase. This result suggests that BiVO4 is already a good oxidation catalyst by itself, originating from its high thermodynamic driving force. This observation shows that the role of those catalysts on our BiVO4 is mainly that of a surface passivation layer. Based on this we predict that the modification of BiVO4 surface with RuOx, a well-known (non-passivating) oxygen evolution catalyst, does not improve the performance; our experiments show that this is indeed the case. These results allow us to develop a modified carrier dynamics model, which will be discussed here. We further compared BiVO4 prepared by various deposition techniques—both chemical and physical routes—to demonstrate their influence on the nature of the surface of BiVO4. The semiconductor/co-catalyst/electrolyte interface was also investigated by depositing CoPi onto those differently prepared BiVO4 photoanodes. Finally, the diverse effects of porous (ion-permeable) and dense (non-ion-permeable) co-catalyst on the photoelectrochemical performance of such semiconductor/co-catalyst systems will be discussed.
9:00 PM - EC4.9.17
Use of TiO2-Al2O3-TiO2 Thin Films with a Designed Sharp Spectral Cut-On Profile for Hot Electron Filtering and Spectroscopy
Zheng Jie Tan 1 , Nicholas Fang 1
1 Massachusetts Institute of Technology Cambridge United StatesShow Abstract
There has been much interest in hot carrier science in the field of renewable energy generation and solar capture. These carriers are generated by illumination and are useful because of their high excess energy which can be extracted as electrical work or for direct fuel generation. However, there has been little work in measuring the energy profile of hot carriers generated in different materials and with different illumination. We propose a general device to retrieve such energy profiles with the use of a sharp electron energy high-pass filter. The device is a multilayer stack of TiO2-Al2O3-TiO2 structure which minimizes smearing effects and transmits a sharp energy cut-off of electrons by direct injection.
9:00 PM - EC4.9.18
Glass Coated Window for Facilitated Gas Evolution in Photoelectrochemical Cells for Water Splitting
Sergio Miranda 1 , Antonio Vilanova 1 , Tania Lopes 1 , Adelio Mendes 1
1 University of Porto Porto PortugalShow Abstract
With approximately 89 000 TW of usable energy continuously striking the
earth surface, the sun is by far the principal clean energy source
able of overcoming the human energy needs. Photovoltaic (PV) still
the best technology to convert solar into electrical energy; however,
it is strongly dependent on the intermittence of solar irradiance and
complementary technologies are needed to store solar energy; the
conversion into chemical energy in the form of a fuel is a promising
path to overcome this limitation.
Photoelectrochemical (PEC) cell combines solar energy harvesting and
water electrolysis in a single device converting solar radiation and
water into hydrogen and oxygen. Usually PEC devices have a
transparent front window, which is placed between the sunlight and the
photoelectrode, through which the sunlight reaches the surface of the
photoelectrode. The evolved gas bubbles should slip easily through
this front window. If the evolved gases get trapped, the amount of
light intensity reaching the photoelectrode is smaller, affecting the
system overall efficiency. Moreover, to maximize the sunlight
harvesting, PEC devices should operate tilted making the sunlight
obstruction by the evolved gas bubbles a pertinent issue.
A titanium dioxide coating was firstly used due to its photoc