F20 Landing Banner 1400x275

Symposium F.SF05 : Advanced Materials for Additive Manufacturing

Available on demand   Show All Abstracts

Symposium Organizers

Yat Li, University of California, Santa Cruz
Juana Mendenhall, Morehouse College
Artur Moreira Pinto, Universidade do Porto
Marcus Worsley, Lawrence Livermore National Laboratory

Symposium Support

Platinum
National Science Foundation - Award #2028092
F.SF05.01/F.SF03.01: Keynote Session
Session Chairs
Available on demand
F-SF01

Available on demand - *F.SF05.01/F.SF03.01.01.01
Aqueous Synthesis of 3D Nano-architected Ceramics and Metals—Nano-Architected TiO2 PhCs

Julia Greer1

California Institute of Technology1

Show Abstract

F.SF05.02: 3D Printed Materials for Applications
Session Chairs
Available on demand
F-SF05

Available on demand - *F.SF05.02.01
3D Printing Functional Materials and Devices

Michael McAlpine1

University of Minnesota Twin Cities1

Show Abstract

F.SF05.03: Additive Manufacturing of Functional Materials
Session Chairs
Available on demand
F-SF05

Available on demand - *F.SF05.03.01
3D Printing of Aerogels

Dong Lin1,Halil Tetik1,Nasrullah Shah1

Kansas State University1

Show Abstract

F.SF05.04: Bioprinting
Session Chairs
Available on demand
F-SF05

Available on demand - *F.SF05.04.01
3D Bioprinting Using UNIversal Orthogonal Network (UNION) Bioinks

Sarah Heilshorn1

Stanford University1

Show Abstract

F.SF05.05: Developments in AM Materials, Techniques and Processes
Session Chairs
Available on demand
F-SF05

Available on demand - *F.SF05.05.01
Additive Manufacturing of Hierarchical Materials Using Self-Assembly Inks

André Studart1

ETH Zurich1

Show Abstract

F.SF05.06: Mechanical Behaviour of 3D Printed Materials
Session Chairs
Available on demand
F-SF05

Available on demand - *F.SF05.06.01
Aqueous Synthesis of 3D Nano-architected Ceramics and Metals—Nano-Architected TiO2 PhCs

Julia Greer1

California Institute of Technology1

Show Abstract

F.SF05.07: Poster Session: Advanced Materials for Additive Manufacturing
Session Chairs
Available on demand
F-SF05

Available on demand - F.SF05.07.04
Tunable Elongation-at-Break of Tensile Mechanical Properties of Stereolithography Additive Manufacturing Through Control of Printing Orientations

Mozah Alyammahi1,Rahmat Agung Susantyoko1,Tawaddod Alkindi1

DEWA R&D Center, Dubai Electricity and Water Authority1

Show Abstract

Available on demand - F.SF05.07.05
Enhanced Toughness in Ceramic-Reinforced Polymer Composites with Herringbone Architectures

Robert Zando1,Ataollah Mesgarnejad1,Chunzhou Pan1,Sandra Shefelbine1,Alain Karma1,Randall Erb1

Northeastern University1

Show Abstract

Available on demand - F.SF05.07.06
Lightweight Cellular Metal Composites with Zero and Tunable Thermal Expansion Enabled by Ultrasonic Additive Manufacturing

Ethan Parsons1

MIT Lincoln Laboratory1

Show Abstract

Available on demand - F.SF05.07.08
The Effects of Solidification Rates on Grain Refinement Capacity of TiC in Directionally Solidified Ti6Al4V Alloy

Naoki Date1,Shunya Yamamoto1,Yoshimi Watanabe2,Shizuka Nakano3,4,Naoko Sato3,Shinsuke Suzuki1

Waseda University1,Nagoya Institute of Technology2,National Institute of Advanced Industrial Science and Technology3,Henry Monitor Inc.4

Show Abstract

Available on demand - F.SF05.07.09
4D Printing with Elastic Hinge Using Shape Memory Polymer and Elastomer via Fused Deposition Modeling 3D Printer

Shunsuke Yamamura1,Eiji Iwase1

Waseda University1

Show Abstract

Available on demand - F.SF05.07.10
3D Printing of Poly-Ether-Ether-Ketone (PEEK) and Reinforced Peek Materials and Its Mechanical Properties with Post Heat Treatments

Kyung-hyun Kim1,Hyeon-Sik Ahn1,Dong-Hwan Kim1,Ae-Sun Oh1,Hyun-Cheol Bae1

Electronics and Telecommunications Research Institute1

Show Abstract

Available on demand - F.SF05.07.11
Synthesis of Polyetherimide(PEI)-Based Photocurable Resin for Biocompatible DLP Stereolithography 3D Printing Process

Jae hwan Chung1,Hee Jeong Park1,Hyejin Kim1,Dong hyun Lee1

Dankook University1

Show Abstract

Available on demand - F.SF05.07.13
In Situ Microbeam X-Ray Scattering and Infra-Red Imaging of Polypropylene/Graphene Nanoplatelet Nanocomposites During Additive Manufacturing

Yu-Chung Lin1,Aniket Raut1,Yuval Shmueli1,Steve Nitodas1,Guillaume Freychet2,Mikhail Zhernenkov2,Miriam Rafailovich1

SUNY Stony Brook University1,Brookhaven National Laboratory2

Show Abstract

Available on demand - F.SF05.07.15
Optimizing the Mechanical Properties of 3D Printed Binary Mixtures of PLA and Polyolefins

Yu-Chung Lin1,Larry Huang2,Richard Li3,Addison Liu4,Nikita Salunke5,Zimei Du1,Amhed Shata1,Henry Takizawa1,Mustafa Zaidi1,Daniel Luo6,Yuval Shmueli1,Miriam Rafailovich1,Steve Nitodas1

SUNY Stony Brook University1,Wilton High Svhhol2,Conestoga High School3,Unionville High School4,Evergreen Valley High School5,Monroe-Woodbury High School6

Show Abstract

Available on demand - F.SF05.07.18
Late News: Rheological Study of 3D Printable Thermoelectric Inorganic Materials

Hyejin Ju1,Jung-Eun Lee1,Han Gi Chae1

Ulsan National Institute of Science and Technology1

Show Abstract

Available on demand - F.SF05.07.19
Late News: Direct Ink Writing of Dehydrofluorinated Poly(vinylidene difluoride) to Fabricate Porous Films

Beenish Imtiaz1,Nick Shepelin1,Sandra Kentish1,Amanda Ellis1

The University of Melbourne1

Show Abstract

Available on demand - F.SF05.07.20
Late News: Investigating and Comparing the Resistance to Tensile Testing of Molded and 3D Printed PLA/PP Polymer Blends

Daniel Luo1,2,Yu-Chung Lin2,Miriam Rafailovich2

Monroe Woodbury High School1,Stony Brook University, The State University of New York2

Show Abstract

Available on demand - F.SF05.07.21
Late News: A Design of 3D-Printable, Biodegradable, Flame Resistant Polymer/Clay Nanocomposite

Yiwei Fang1,Christian Apostol2,Jiale Lu3,Lawrence Zhao4,Yuan Xue1,Yichen Guo1,Miriam Rafailovich1

Stony Brook University1,Ward Melville High School2,Princeton International School of Mathematics and Science3,University Laboratory High School4

Show Abstract

F.SF05.02: 3D Printed Materials for Applications
Session Chairs
Available on demand
F-SF05

Available on demand - *F.SF05.02.03
Manufacturing Molecules for the New Carbon Economy

Eric Duoss1

Lawrence Livermore National Laboratory1

Show Abstract

F.SF05.03: Additive Manufacturing of Functional Materials
Session Chairs
Available on demand
F-SF05

Available on demand - *F.SF05.03.02
Electrochemically Active Architected Materials by Additive Manufacturing

Xiaoxing Xia1,Julia Greer2,Claudio Di Leo3,Carlos Portela2,Dennis Kochmann4,Eric Duoss1,Sarah Baker1

Lawrence Livermore National Laboratory1,California Institute of Technology2,Georgia Institute of Technology3,ETH Zürich4

Show Abstract

F.SF05.04: Bioprinting
Session Chairs
Available on demand
F-SF05

Available on demand - *F.SF05.04.02
3D Printing of Engineered Bacteria for the Production of Biofilms-on-a-Chip

Anne Meyer1

University of Rochester1

Show Abstract

F.SF05.05: Developments in AM Materials, Techniques and Processes
Session Chairs
Available on demand
F-SF05

Available on demand - *F.SF05.05.02
Complex Materials Design for Multidimensional Additive Processing

Subramanian Ramakrishnan1,Tarik Dickens1

Florida Agricultural and Mechanical University1

Show Abstract

F.SF05.06: Mechanical Behaviour of 3D Printed Materials
Session Chairs
Available on demand
F-SF05

Available on demand - F.SF05.06.02
Bridging Micro-Mechanical and Macromechanical Properties of Titanium Alloys Made by Additive Manufacturing

Yu Zou1

University of Toronto1

Show Abstract

Available on demand - F.SF05.06.04
Electromechanical Behavior of Additively Manufactured Polycrystalline Zinc Oxide

Rebecca Gallivan1,Daryl Yee1,Julia Greer1,Zachary Aitken2,Antoine Chamoun-Farah3,Yong-Wei Zhang2

California Institute of Technology1,Institute of High Performance Computing, A*STAR2,Washington University3

Show Abstract

F.SF05.02: 3D Printed Materials for Applications
Session Chairs
Available on demand
F-SF05

Available on demand - F.SF05.02.04
3D Printed Electrodes with Periodic Pores for Fast Bubble Transport During High-Rate Alkaline Water Electrolysis

Tianyi Kou1

University of California, Santa Cruz1

Show Abstract

F.SF05.03: Additive Manufacturing of Functional Materials
Session Chairs
Available on demand
F-SF05

Available on demand - *F.SF05.03.03
Multi-Functional Materials for Additive Manufacturing—Electromechanical Materials for Self-Sensing and Actuation

Xiaoyu Zheng1

University of California Los Angeles1

Show Abstract

F.SF05.04: Bioprinting
Session Chairs
Available on demand
F-SF05

Available on demand - *F.SF05.04.03
Additively Manufactured Architected Synthetic Biofilms

William Hynes1,Karen Dubbin1,Javier Alvarado1,Monica Moya1

Lawrence Livermore National Laboratory1

Show Abstract

F.SF05.05: Developments in AM Materials, Techniques and Processes
Session Chairs
Available on demand
F-SF05

Available on demand - *F.SF05.05.03
Novel Inks Based on Capillary Suspensions for Additive Manufacturing with 2D Materials

Brian Derby1

University of Manchester1

Show Abstract

F.SF05.06: Mechanical Behaviour of 3D Printed Materials
Session Chairs
Available on demand
F-SF05

Available on demand - F.SF05.06.05
Limits of Mechanical Stability in Nanoscale Direct Laser Writing

Wolfgang Wenzel1,Elaheh Sedghamiz1,Modan Liu1

Karlsruhe Institute of Technology1

Show Abstract

F.SF05.02: 3D Printed Materials for Applications
Session Chairs
Available on demand
F-SF05

Available on demand - F.SF05.02.06
3D Printed Self-Supporting Elastomeric Structures for Multifunctional Microfluidics

Ruitao Su1,Jiaxuan Wen1,Qun Su1,Michael Wiederoder2,Joshua Uzarski2,Steven Koester1,Michael McAlpine1

University of Minnesota Twin Cities1,U.S. Army Combat Capabilities Development Command Soldier Center2

Show Abstract

F.SF05.03: Additive Manufacturing of Functional Materials
Session Chairs
Available on demand
F-SF05

Available on demand - F.SF05.03.06
3D Printing of Hydroxypropyl Cellulose Liquid Crystal—Towards Tunable and Sustainable Photonic Structures

Chun Lam Clement Chan1,Iek Man Lei1,Yan Yan Shery Huang1,Silvia Vignolini1

University of Cambridge1

Show Abstract

F.SF05.04: Bioprinting
Session Chairs
Available on demand
F-SF05

Available on demand - *F.SF05.04.04
Electrohydrodynamic Printing to Achieve the Next Generation of Functional Biomaterials

Miguel Castilho1,2

UMC Utrecht1,Eindhoven University of Technology2

Show Abstract

F.SF05.05: Developments in AM Materials, Techniques and Processes
Session Chairs
Available on demand
F-SF05

Available on demand - F.SF05.05.04
3D Printable Sustainable Biocomposites from Corn Starch and Husks

Yijie Jiang1,Md. Nurul Islam1

University of North Texas1

Show Abstract

F.SF05.06: Mechanical Behaviour of 3D Printed Materials
Session Chairs
Available on demand
F-SF05

Available on demand - F.SF05.06.06
Mechanical Properties of 3D-Printed Elastomeric Foams

Ali Alperen Bakir1,Sezer Ozerinc2

The University of Nottingham1,Middle East Technical University2

Show Abstract

F.SF05.02: 3D Printed Materials for Applications
Session Chairs
Available on demand
F-SF05

Available on demand - F.SF05.02.07
3D Printed Soft Robots with Self-Healing, Reconfigurable and Conducting Capabilities

Eliot Gomez1,Shiwanka Wanasinghe2,Obed Dodo2,Michael Durstock3,Dominik Konkolewicz2,Carl Thrasher3

UES, Inc.1,Miami University2,Wright-Patterson Air Force Base3

Show Abstract

F.SF05.03: Additive Manufacturing of Functional Materials
Session Chairs
Available on demand
F-SF05

Available on demand - F.SF05.03.08
Additive Manufacturing of Functional Materials via Photopolymer Complex Synthesis

Daryl Yee1,Julia Greer1

California Institute of Technology1

Show Abstract

F.SF05.05: Developments in AM Materials, Techniques and Processes
Session Chairs
Available on demand
F-SF05

Available on demand - F.SF05.05.05
4D Printing of High-Performance Shape-Memory Isotropic Thermoset via Fused Deposition Modelling—Print the Unprintable

Qiyi Chen1,Rigoberto Advincula1

Oak Ridge National Laboratory1

Show Abstract

F.SF05.06: Mechanical Behaviour of 3D Printed Materials
Session Chairs
Available on demand
F-SF05

Available on demand - F.SF05.06.07
Microstructure Modeling of Uniform Droplet Sprayed Deposits for Mg Alloy-Based Additive Manufacturing

Charalabos Doumanidis6,Nikolaos Kostoglou1,Hiroki Fukuda2,Emre Gunduz3,Claus Rebholz4,Teiichi Ando5

Montanuniversitat Leoben1,Fukuda Metal Foil & Powder Co Ltd2,Naval Postgraduate School3,University of Cyprus4,Northeastern University5,Vin University6

Show Abstract

F.SF05.02: 3D Printed Materials for Applications
Session Chairs
Available on demand
F-SF05

Available on demand - F.SF05.02.08
3D Printing of 0D/1D/2D Materials into Complex Architectures

Kun Fu1

University of Delaware1

Show Abstract

F.SF05.04: Bioprinting
Session Chairs
Available on demand
F-SF05

Available on demand - F.SF05.04.05
3D Printing of Living Microbial Fuel Cell Anode

Megan Freyman1,Tianyi Kou1,Shanwen Wang1,Yat Li1

University of California, Santa Cruz1

Show Abstract

F.SF05.03: Additive Manufacturing of Functional Materials
Session Chairs
Available on demand
F-SF05

Available on demand - F.SF05.03.10
Aerosol Jet Printing of Battery Separator Membranes

Andrew Fassler1,2,Ryan Kohlmeyer1,2,3,Gregory Horrocks1,Michael Durstock1

Air Force Research Laboratory1,UES, Inc2,Xerion Advanced Battery Corp3

Show Abstract

F.SF05.05: Developments in AM Materials, Techniques and Processes
Session Chairs
Available on demand
F-SF05

Available on demand - F.SF05.05.06
A Time-Saving and Cost-Effective Method to Process New Alloys by Laser Powder Bed Fusion

Fabrizio Marinucci1,Paolo Fino1,Alberta Aversa1,Alessandra Martucci1,Federico Bosio1,Federica Bondioli1,Diego Manfredi1,Mariangela Lombardi1

Politecnico di Torino1

Show Abstract

F.SF05.06: Mechanical Behaviour of 3D Printed Materials
Session Chairs
Available on demand
F-SF05

Available on demand - F.SF05.06.08
Multi-Modal Synchrotron Analysis for the Design of Corrosion Resistant Additively Manufactured Stainless Steels

Jason Trelewicz1,David Sprouster1,Gary Halada1

Stony Brook University1

Show Abstract

F.SF05.02: 3D Printed Materials for Applications
Session Chairs
Available on demand
F-SF05

Available on demand - F.SF05.02.09
3D-Printed Pseudocapacitive Electrodes Enable Efficient Electron and Ion Transport at High Mass Loadings

Bin Yao1,Marcus Worsley2,Yat Li1

University of California, Santa Cruz1,Lawrence Livermore National Laboratory2

Show Abstract

F.SF05.04: Bioprinting
Session Chairs
Available on demand
F-SF05

Available on demand - F.SF05.04.06
High Fidelity 3D Printable Materials with Spatio-Temporally Tunable Degradation for Tissue Engineering

Archish Muralidharan1,Robert McLeod1,Stephanie Bryant1

University of Colorado Boulder1

Show Abstract

F.SF05.03: Additive Manufacturing of Functional Materials
Session Chairs
Available on demand
F-SF05

Available on demand - F.SF05.03.12
Bamboo Fibre-Reinforced Mycelium Composites for Sustainable Structures

Hortense Le Ferrand1,Nazanin Saeidi2,3,Eugene Soh1,Zhi Yong Chew1

Nanyang Technological University1,ETH Zürich2,KIT3

Show Abstract

F.SF05.05: Developments in AM Materials, Techniques and Processes
Session Chairs
Available on demand
F-SF05

Available on demand - F.SF05.05.07
Additive Manufacturing of Conductive Polymer Using Stereolithography—Effects of Multi-Walled Carbon Nanotubes Reinforcement on Electrical Properties and Dimensional Accuracy

Daniel Lim1,2,Jaemin Lee1,Wonjoon Choi1

Korea University1,University of California, Berkeley2

Show Abstract

F.SF05.06: Mechanical Behaviour of 3D Printed Materials
Session Chairs
Available on demand
F-SF05

Available on demand - F.SF05.06.11
The Effect of Part Printing Angle Normal to the Print Bed for Fused Filament Fabrication of 17-4 PH Stainless-Steel Metal Additive Manufacturing

Tawaddod Alkindi1,Mozah Alyammahi1,Rahmat Agung Susantyoko1

DEWA R&D Center, Dubai Electricity and Water Authority1

Show Abstract

F.SF05.02: 3D Printed Materials for Applications
Session Chairs
Available on demand
F-SF05

Available on demand - F.SF05.02.10
A Low-Maintenance Soil Moisture Sensor Fabricated with Ecofriendly and Biodegradable Materials

Yongkun Sui1,Madhur Atreya1,Subash Dahal2,Rajiv Khosla2,Gregory Whiting1

University of Colorado Boulder1,Colorado State University2

Show Abstract

F.SF05.04: Bioprinting
Session Chairs
Available on demand
F-SF05

Available on demand - F.SF05.04.07
High-Throughput Methods for Materials Creation, Selection and Identification Leading to the Production of Personalised Cell Instructive Biomedical Devices via Ink Jet Based 3D Printing

Ricky Wildman1,Yinfeng He1,Morgan Alexander1,Derek Irvine1,Paul Williams1,Zuoxin Zhou1,Richard Hague1,Christopher Tuck1,Jeni Luckett1,Jean Dubern1,Andrew Hook1

University of Nottingham1

Show Abstract

F.SF05.05: Developments in AM Materials, Techniques and Processes
Session Chairs
Available on demand
F-SF05

Available on demand - F.SF05.05.08
Electrohydrodynamic Redox 3D Printing—Broadening the Materials Range for Multi-Material Additive Manufacturing at the Submicron Scale

Alain Reiser1,Lukas Koch1,Maxence Menétrey1,Mirco Nydegger1,Ralph Spolenak1

ETH Zurich1

Show Abstract

F.SF05.06: Mechanical Behaviour of 3D Printed Materials
Session Chairs
Available on demand
F-SF05

Available on demand - F.SF05.06.13
Late News: Mechanical Testing of Stereolithographically Fabricated Polymer-Graphene Composites

Kalaimani Markandan1,Changquan Lai1

Nanyang Technological University1

Show Abstract

F.SF05.02: 3D Printed Materials for Applications
Session Chairs
Available on demand
F-SF05

Available on demand - F.SF05.02.11
Developing Ceramic AM to Unlock Enhanced Thermal Storage by Swirling Two-Phase Flow in a Package Integrated Cyclone COoler (PICCO)—A Case Study

Cathleen Hoel1,Rinaldo Miorini1,Hendrik De Bock1,Darin Sharar2

GE Research1,U.S. Army Research Laboratory2

Show Abstract

F.SF05.04: Bioprinting
Session Chairs
Available on demand
F-SF05

Available on demand - F.SF05.04.08
Microstructural Control of Polymers Achieved Using Controlled Phase Separation During 3D Printing with Oligomer Libraries—Dictating Drug Release for Personalized Subdermal Implants

Laura Ruiz Cantu1,Gustavo F. Trindade1,Zuoxin Zhou1,Vincenzo Taresco1,Laurence Burroughs1,Elizabeth Clark1,Felicity Rose1,Morgan Alexander1,Christopher Tuck1,Richard Hague1,Clive J Roberts1,Derek Irvine1,Ricky Wildman1

The University of Nottingham1

Show Abstract

F.SF05.05: Developments in AM Materials, Techniques and Processes
Session Chairs
Available on demand
F-SF05

Available on demand - F.SF05.05.09
Engineering a Biodegradable, Electrically Conductive Polymer Nanocomposite via 3D Printing

Yiwei Fang1,Xianghao Zuo1,Yuan Xue1,Yichen Guo1,Miriam Rafailovich1

Stony Brook University1

Show Abstract

F.SF05.02: 3D Printed Materials for Applications
Session Chairs
Available on demand
F-SF05

Available on demand - F.SF05.02.12
Metallic 3D Printing—Implications to Customized Prosthetic Implants

Sze Yi Mak1,Ching Hang Bob Yung2

The University of Hong Kong1,Koln 3D Technology (Medical) Limited2

Show Abstract

F.SF05.04: Bioprinting
Session Chairs
Available on demand
F-SF05

Available on demand - F.SF05.04.09
Multifunctional Artificial Artery from Direct 3D Printing with Built-In Ferroelectricity and Tissue-Matching Modulus for Real-Time Sensing and Occlusion Monitoring

Jun Li1,Yin Long1,Fan Yang1,Xudong Wang1

University of Wisconsin–Madison1

Show Abstract

F.SF05.05: Developments in AM Materials, Techniques and Processes
Session Chairs
Available on demand
F-SF05

Available on demand - F.SF05.05.11
Ink Design Strategies for the Direct Ink Writing of Energy Devices

Stefano Tagliaferri1,Apostolos Panagiotopoulos1,Heather Au1,Pierpaolo Modugno1,Magdalena Titirici1,Cecilia Mattevi1

Imperial College London1

Show Abstract

F.SF05.04: Bioprinting
Session Chairs
Available on demand
F-SF05

Available on demand - F.SF05.04.10
Support-Enabled Three-Dimensional Printing of Bacteria

Marco Riccardo Binelli1,Patrick Rühs1,Giovanni Pisaturo1,André Studart1

ETH Zürich1

Show Abstract

F.SF05.05: Developments in AM Materials, Techniques and Processes
Session Chairs
Available on demand
F-SF05

Available on demand - F.SF05.05.12
PDMS-Rich Domain on the Electrical Properties of 3D-Printed CNT/PDMS Foam Nanocomposites

Chao Liu1,Junjun Ding1

Alfred University1

Show Abstract

Available on demand - F.SF05.05.13
Process Development of WC-Ni Cemented Carbide Composites via Laser Powder Bed Fusion

Edgar Mendoza Jimenez1,B. Reeja Jayan1,Jack Beuth1

Carnegie Mellon University1

Show Abstract

Available on demand - F.SF05.05.14
Selective Laser Melting of Metal Matrix Composites

Ethan Parsons1

MIT Lincoln Laboratory1

Show Abstract

Available on demand - F.SF05.05.15
Structure and Tensile Behavior of Nanocrystalline Laminar Composites Fabricated by Ultrasonic Additive Manufacturing

Austin Ward1,Zachary Cordero2,1

Rice University1,Massachusetts Institute of Technology2

Show Abstract

Available on demand - F.SF05.05.16
Voxel-Scale Conversion Mapping Informs Intrinsic Resolution in Stereolithographic Additive Manufacturing

Tobin Brown1,Callie Higgins1,Jason Killgore1

National Institute of Standards and Technology1

Show Abstract

Available on demand - F.SF05.05.17
Late News: Additive Manufacturing of Reversible Covalent Polymer Networks for Self-Healing Soft Robotic Applications

Joost Brancart1,Ellen Roels1,Seppe Terryn1,Bram Vanderborght1,Guy Van Assche1

Vrije Universiteit Brussel1

Show Abstract

Available on demand - F.SF05.05.19
Late News: Direct-Write 3D Printing from Solution for Tunable Structural Color of Bottlebrush Block Copolymers

Bijal Patel1,Ying Diao1

University of Illinois at Urbana-Champaign1

Show Abstract

2020-12-02   Show All Abstracts

Symposium Organizers

Yat Li, University of California, Santa Cruz
Juana Mendenhall, Morehouse College
Artur Moreira Pinto, Universidade do Porto
Marcus Worsley, Lawrence Livermore National Laboratory

Symposium Support

Platinum
National Science Foundation - Award #2028092
F.SF05.08: Live Panel Discussion I: New Technologies Enabled by Additive Manufacturing
Session Chairs
Yat Li
Marcus Worsley
Wednesday PM, December 02, 2020
F.SF05

7:30 PM - F.SF05.08
Panel Discussion


Show Abstract

9:30 PM - F.SF05.08
Eric Duoss, panelist


Show Abstract

9:30 PM - F.SF05.08
Xiaoyu Zheng, panelist


Show Abstract

9:30 PM - F.SF05.08
Michael McAlpine, panelist


Show Abstract

9:30 PM - F.SF05.08
Julia Greer, panelist


Show Abstract

2020-12-03   Show All Abstracts

Symposium Organizers

Yat Li, University of California, Santa Cruz
Juana Mendenhall, Morehouse College
Artur Moreira Pinto, Universidade do Porto
Marcus Worsley, Lawrence Livermore National Laboratory

Symposium Support

Platinum
National Science Foundation - Award #2028092
F.SF05.09: Live Panel Discussion II: Opportunities and Challenges in Architected Materials
Session Chairs
Yat Li
Marcus Worsley
Thursday AM, December 03, 2020
F.SF05

8:00 AM - F.SF05.09
Panel Discussion


Show Abstract

10:00 AM - F.SF05.09
Dong Lin, panelist


Show Abstract

10:00 AM - F.SF05.09
Andre Studart, panelist


Show Abstract

10:00 AM - F.SF05.09
Brian Derby, panelist


Show Abstract

10:00 AM - F.SF05.09
Subramanian Ramakrishnan, panelist


Show Abstract

2020-12-04   Show All Abstracts

Symposium Organizers

Yat Li, University of California, Santa Cruz
Juana Mendenhall, Morehouse College
Artur Moreira Pinto, Universidade do Porto
Marcus Worsley, Lawrence Livermore National Laboratory

Symposium Support

Platinum
National Science Foundation - Award #2028092
F.SF05.10: Live Panel Discussion III: Future of Bioprinting
Session Chairs
Juana Mendenhall
Artur Moreira Pinto
Friday PM, December 04, 2020
F.SF05

6:30 PM - F.SF05.10
Panel Discussion


Show Abstract

8:30 PM - F.SF05.10
Miguel Castilho, panelist


Show Abstract

8:30 PM - F.SF05.10
Sarah Heilshorn, panelist


Show Abstract

8:30 PM - F.SF05.10
Anne Meyer, panelist


Show Abstract

8:30 PM - F.SF05.10
Monica Moya, panelist


Show Abstract

Publishing Alliance

MRS publishes with Springer Nature

 

Corporate Partners

Symposium Support

Media Partners